Bitcoin mining equipment repair

Have your ASICs for cryptocurrency mining repaired with D-Central's mining equipment repair services

Repair your faulty Cryptocurrency mining ASIC

When your Bitcoin mining equipment fails, you should repair your ASIC miners repairs as soon as possible. Otherwise, you are wasting money every second. We provide full Bitcoin mining machine maintenance services and help our customers repair their cryptocurrency miners effortlessly. The profitability of cryptocurrency mining machines is also affected by their failure rate. Our rates are very affordable for all participants, small and large projects. You can again buy some of our reconditioned spare parts and change the broken part yourself. Our service center uses only professional repair equipment, as well as reconditioned original spare parts. With D-Central, you will receive quality ASIC miners repairs of your mining equipment with a warranty for any work for up to 30 days. You can ship us the damaged part for reparation or replacement after opening a support ticket with us.

We carry out high-quality and inexpensive repair of ASIC miners and power supplies

Our service center is located in Montreal, but we accept orders from all locations in North America. We also offer partnerships with Canadian colocation centers for ASIC miners repairs, with a collection service. Our work is guaranteed, and our prices are among the lowest on the market. When repairing mining equipment, we only use new spare parts. We also sell spare parts for the ASIC miners repairs of miners wholesale and retail. Thanks to this, we always have everything in stock at a low cost.

We perform repair work related to welding, complete replacement of ASIC miners’ parts and components, and other work of any complexity using special equipment. Our specialists can help you in the most difficult situations and in the shortest possible time. We provide a 30-day warranty for all work performed. Diagnostics and ASIC miners repairs are carried out on the latest technological equipment using original components. Extensive experience in repairing cryptocurrency mining equipment enables our customers to get professional miner repair in the shortest possible time. The work is carried out strictly according to the standards of the main manufacturers.

Every hash counts, get your hardware fixed

We can repair all cryptocurrency mining hardware using only genuine parts, significantly reducing the downtime typically associated with repairs. Our trained and dedicated repair center engineers can quickly diagnose issues and repair equipment from various manufacturers with genuine parts to help miners. We offer a reliable ASIC miners repairs service in Canada, and our team can travel all over North America to meet your installation, maintenance and repair needs for ASIC Bitcoin miners. You can also send us all your broken boards for repair at our Montreal repair shop. Don’t let repair logistics hurt your bottom line, Eliminate downtime and get back to mining as quickly as possible. All repair work is carried out by our firm D-Central Labs, located in Pointe-Claire. We have partnerships with miners all over North America. We have therefore developed an offer adapted to the needs of our regular customers with repair volumes.  Hashboard repair services listed now include a set of 5 replacement pieces. We require a 30% non-refundable deposit to cover the parts required for the repair. We do not do volume discounts.

Hashboard Repair Services

Power Supply Repair Services

Hardware Upgrade Services

Prices are in Canadian Dollars. Please note the following taxes: GST (5%) and QST (9.975%)

Frequently asked questions

Chip burnout occurs due to overheating, power surges, and malfunction. Our technicians will identify damaged chips and replace them with new ones. Note that we can replace the burnt out components, but if the PCB is burnt this hashboard will not be repaired.

This is one of the most common breakdowns, since all the work of mining the cryptocurrencies directly falls on the chips, which leads to breakdowns. This could be a power distribution problem, a problem with the first or last chip, or a problem requiring complete chip reflow. If a reflow is necessary, our technicians will join you to ask for a confirmation before doing the reflow. This will increase the price for that hashboard by 50% and has no guaranteed results, however, if the reflow does not work we will not charge you.

This is a common issue with Antminer 17 Series. It is mostly due to very poor solder quality leading to 30% failure rates on theses generations. We have noticed alot of microfracture happen especially with models T17e, S17e, T17+ and S17+. Just like the unrecognized chips, this could also be a power distribution problem or a problem with the first or last chip. If a reflow is necessary, our technicians will join you to ask for a confirmation before doing the reflow. This will increase the price for that hashboard by 50% and has no guaranteed results, however, if the reflow does not work we will not charge you.

For the equipment to work as long as possible, it is necessary on time to:
• blow fans;
• assess the operation of the cooling system;
• check the effectiveness of cooling systems using thermal paste;
• blow radiators;
• track the operation of chips and the possibility of overheating.

Unfortunately even if your machine finds some of the chips, the hashboard will only start working if each of the chips on the board is functional. One or more chips may need replacement to cover your lost hashrate.

One or more of your temperature sensors need to be replaced. You can send your hashboard to our repair center where we will quickly replace your sensors, test all chips, and return your board ready for hashing.

Yes, absolutely! Our Innosilicon A10 upgrade service from 4G to 5G or 6G is one of our most popular services. This is explained by the high valuation of these machines thanks to their monster profitability of the moment. This is a tough task and requires between 24 to 48 parts replacement.

Since the launch of our repair services, we have been in a constant and increasing evolution of requests. Since 2021 the demand volumes have become such that we are currently looking for a new location to welcome even more staff among us. That said, we currently have lead times of around 1 to 2 months. This is explained by the rise in prices, the high failure rates of the 17th generation of Bitmain, the strong demand for upgrades from A10 as well as all the measures relating to COVID 19. Indeed, our center for repair is currently running at maximum legal capacity. We are striving to continue to grow very quickly, with a list of clients growing day by day. Thank you to all for your confidence and your understanding.

Do you need help with your Bitcoin business?

We are more than a mining facility; we are your mining partners. Whether you're an amateur or a professional miner, our goal is to make your mining more profitable by offering the latest and most efficient ASIC mining solutions.

Please note that our estimated processing times are currently between 2-3 months. Several factors come into play, including working conditions with COVID-19, explosive demand for repairs, poor reliability of 17th generation machines, etc. Added to this is the difficulty of procuring replacement chips in a context of global semiconductor shortage and price inflation. We do our best to get everything back to you as quickly as possible, at the most affordable prices.