BraiinsOS+ firmware is a custom firmware designed for use with select ASIC miners. One of the benefits of using BraiinsOS+ firmware is that it allows users to complex algorithm profiles directly on their ASICs, which can improve mining performance. In addition, BraiinsOS+ firmware provides users with full control over their devices, including the ability to adjust fan speeds, overclock GPUs, and monitor hashrates. Overall, BraiinsOS+ firmware offers many advantages for users who are looking to get the most out of their ASIC mining devices.
Installing BraiinsOS+ on your Antminer 17 series miner is a simple process. Begin by downloading the latest firmware from the Braiins website.
Before we get started, make sure you have the following items:
Now that you have everything you need let’s get started.
First, format your USB drive as FAT32.
Next, we will refresh Bitmain’s firmware to its original manufactured state with the help of a Recovery SD Card.
To do so, we need to download and extract the contents of this file on the Micro SD Card: https://d-central.tech/dl/SD_RECOVERY_S17_T17.zip
Once the download is complete, unzip the file and copy it to your Micro SD Card.
Next, plug the Micro SD card into your Antminer S17 miner and power on the device.
Let the the miner boot up and wait for the control board to blink both its red and green LED lights three times.
Power off the miner and remove the SD card.
You are now factory restored with the original Bitmain firmware. We can now proceed to upgrade to BraiinsOS+.
To do so, we’ll go to our firmware page and download the BraiinsOS+ firmware image for 17 series ASIC miner.
Open Balena Etcher and click on “Flash From File”
Select the IMG file for Antminer 17 Series model and click open
Click on “Select Target” to choose the appropriate SD card and click on “Flash”
Next, plug the Micro SD card into your Antminer S17 miner and power on the device.
Let the miner boot up and wait for the control board to blink both its red and green LED lights three times.
Power off the miner and remove the SD card.
You are now flashed on BraiinsOS+
Happy hashing!
The BraiinsOS+ firmware is designed to get the best mining performance from your Antminer 17 series. To use it, you will need to flash the firmware to your device. This can be done using a USB cable and the included software. Once you have flashed the firmware, you will need to make sure that your device is connected to the correct mining pool. You can do this by editing the “config.txt” file on your device. After you have made the necessary changes, you will need to reboot your device for the changes to take effect. The BraiinsOS+ firmware is constantly being updated, so it is important to check for updates regularly. By following these instructions, you can ensure that you are getting the most out of your Antminer 17 series. And if you have any questions or run into any problems, be sure to let us know. We’re always happy to help!
Disclaimer: The information provided on this blog is for informational purposes only and should not be taken as any form of advice.
Bitcoin is an innovative decentralized digital currency built on the principles of cryptography and blockchain technology. At its core, Bitcoin
Bitcoin has quickly become one of the most popular cryptocurrencies and is now being used by millions around the world.
As the cryptocurrency market continues to gain more mainstream attention, regulators like the U.S. Securities and Exchange Commission (SEC) have
