Mining with a graphics processor can generate profits if you have access to cheap electricity. However, this process is known to damage graphics cards and affect their longevity. Those considering mining should keep these factors in mind, especially if they plan to resell their cards later. It makes sense to mine a cryptocurrency with a graphics card. They are easy to obtain, are not excessively expensive in most cases and can generate excellent hash power after some initial adjustments. Once a rig is operational, most people just leave their hardware chopping. If necessary, it will switch to different mining pools alone. Most miners pay little attention to the material, choosing to monitor things from a distance. This does not mean, however, that your hardware does not need to be verified because it remains subject to many constraints when extracting cryptocurrency. This level of stress is often underestimated. When you start mining cryptocurrency, your GPUs are constantly under full load and their fans usually run at the highest speed. It may seem less stressful than regaining strength, but this is not necessarily the case. Letting the GPU fans run at a constant, constant speed will be used to exhaust them relatively quickly. Even though fans are designed to spin a bit, their longevity is seriously affected by the speed at which they are forced to run. However, not using fans when extracting cryptocurrency is most likely a bad idea. The thermal cycle must also be taken into account when mining cryptocurrency using GPUs. That said, some power limit settings for each card can make it a trivial problem most often. Reapply from time to time a thermal paste on a graphics processor does wonders to keep the card cool and avoid significant damage. Cryptocurrency mining, whatever it is, will force a card to reach its limit as long as it is running. Certainly, most models can handle this easily, but it will always impact the card one way or another. These effects may not become apparent immediately.