T19 Online Upgrade Tutorial: Enhancing Your Mining Efficiency

This tutorial will provide you with a step-by-step guide to perform an online upgrade for the T19 mining machine. By following these instructions, you will be able to update the firmware of your T19 miner to the latest version. Ensure that you have the necessary hardware tools and software before proceeding.

Tools Needed

Before you begin, make sure you have the following tools ready:

1. Hardware: Computer (running Windows), T19 mining machine (or control board), router.
2. Software: Latest firmware from the official website, IPReporter tool, Google Chrome (or Firefox) web browser.

Steps to Antminer T19 Online Upgrade

Step 1: Preparing the Tools

1. Connect your computer to the router, ensuring that the mining machine (or control board) is also connected to the same router. Make sure the router has DHCP service enabled.
2. Launch the IPReporter tool on your computer and click on the “Start” button.
3. Press the IPReport button on the T19 miner or control board. The miner’s light will flash red and green for 5 times, indicating a successful IP feed to the network.

Step 2: Logging into the Miner

1. The IPReporter software on your computer will display the IP and MAC address of the T19 miner. Note down the IP address.
2. Open Google Chrome (or Firefox) web browser and type the obtained IP address into the address bar. Press Enter.
3. A login prompt will appear. Enter the default username and password, which is “root”. If you have changed the login credentials, use the customized username and password to log in.

Step 3: Miner Upgrade

1. After logging in, locate the system dropdown bar in the backend of the miner. Click on it to reveal the hidden options.
2. From the dropdown menu, select “Firmware Upgrade” to enter the firmware upgrade screen.
3. In the firmware upgrade screen, click the “Upload” button (1) to open the file selection window.
4. Locate the downloaded firmware file on your computer (ensure you have downloaded the latest firmware from the official website). Select the file and open it.
5. After opening the firmware file, the firmware name will be displayed in the window. Confirm that the firmware is correct and proceed to upgrade by tapping the upgrade button.
6. The miner will indicate that the firmware upgrade is in progress. Wait for approximately 1 minute for the upgrade process to complete.
7. The miner will automatically restart after the firmware upgrade and refresh the page. At this point, the miner has completed the upgrade.
8. Verify if the firmware version of the miner matches the upgraded firmware version to ensure a successful upgrade.

Conclusion

By following this step-by-step tutorial, you have successfully performed an online upgrade for your T19 mining machine. It is essential to keep your miner’s firmware up to date to ensure optimal performance and security. If you encounter any issues during the upgrade process, please contact our support team for assistance.