4479 Desserte Nord Autoroute 440, Laval, QC H7P 6E2

Here is a step-by-step guide on how to detach the PSU from these miners:

  1. Prepare the necessary equipment, including a hex head screwdriver with a diameter of 3mm and a pair of protective gloves.
  2. Place the miner with the PSU facing upwards, ensuring that it is in a stable position.
  3. Locate the metal holder that clasps the miner and PSU together. Use the screwdriver to unscrew the metal holder and remove the power connector.
  4. Rotate the miner 90 degrees counterclockwise. On the side of the PSU, you will see a metal tab. Push down this tab as depicted in picture 3 (refer to the video for visual guidance) and simultaneously push the PSU outwards.
  5. The PSU is now detached from the miner. To reattach the PSU, align it with the hooks on the miner and push it inwards from the power AC input port until the PSU is securely hooked back in place.

Following these steps will allow you to safely detach the PSU from your ANTMINER models. If you need further assistance or have any additional questions, our support team is always available to help.