Description
Antminer Shroud Duct Adapter
The Antminer shroud duct adapter is a reliable choice for Bitcoin mining operations.
Route your Antminer’s exhaust into standard 6-inch HVAC ducting with this 3D-printed shroud adapter. Designed for home miners who need to vent hot air out of a room, into an attic, or through a wall, this shroud converts the Antminer’s 120mm fan output into a 6-inch (152mm) round duct connection for clean, sealed airflow management.Why You Need a Duct Shroud
Running an ASIC miner indoors without exhaust management means dumping 1,400+ watts of heat directly into your room. A duct shroud lets you capture that exhaust and route it wherever you want — outside, into another room for heating, or into existing HVAC ducting. It also reduces noise by containing the airflow path.| Specifications | |
|---|---|
| Inlet | 120mm (standard Antminer fan) |
| Outlet | 6-inch (152mm) round duct |
| Material | 3D-printed PETG (heat-resistant) |
| Compatibility | Antminer S9, S17, T17, S19, T19, S21, T21, and other models with 120mm fans |
| Duct Connection | Fits standard 6-inch flexible or rigid HVAC ducting |
Compatible Miners
- Bitmain Antminer S9, S9i, S9j
- Bitmain Antminer S17, S17+, S17 Pro, T17, T17+
- Bitmain Antminer S19, S19 Pro, S19j, S19j Pro, T19
- Bitmain Antminer S21, T21
- Any ASIC miner with standard 120mm exhaust fans
Can I use this with an inline fan?
Yes. Pair it with a 6-inch inline fan (like the AC Infinity Cloudline T6) to actively pull hot air through ducting. This is the recommended setup for maximum heat extraction and noise reduction.
Do I need one shroud or two per miner?
Most Antminer models have fans on both the intake and exhaust sides. You only need one shroud on the exhaust (hot) side for heat venting. Add a second on the intake side if you want to pull fresh air from a specific source.
What ducting should I use with this?
Standard 6-inch flexible aluminum ducting from any hardware store works perfectly. For best airflow, keep runs as short and straight as possible. Insulated ducting will reduce noise further.
D-Central Technologies — Bitcoin Mining Hackers since 2016. We build the accessories that make home mining practical. Every hash counts.
Can I use this with an inline fan?
Yes. Pair it with a 6-inch inline fan (like the AC Infinity Cloudline T6) to actively pull hot air through ducting. This is the recommended setup for maximum heat extraction and noise reduction.
Do I need one shroud or two per miner?
Most Antminer models have fans on both the intake and exhaust sides. You only need one shroud on the exhaust (hot) side for heat venting. Add a second on the intake side if you want to pull fresh air from a specific source.
What ducting should I use with this?
Standard 6-inch flexible aluminum ducting from any hardware store works perfectly. For best airflow, keep runs as short and straight as possible. Insulated ducting will reduce noise further.
Avis
Il n’y a pas encore d’avis.