Description
C14 To 5-15r Power Splitter
The C14 to 5-15r power splitter is a quality power solution for mining setups.
Split one IEC C14 power source into two standard NEMA 5-15R outlets. This splitter cable lets you power two 120V devices (fans, routers, monitors, controllers) from a single C14 connection — useful for mining setups where outlets are limited or you are running accessories off a PDU or UPS with C13 outlets.| Specifications | |
|---|---|
| Connector A | IEC 60320 C14 (male plug) |
| Connector B | 2x NEMA 5-15R (standard 120V outlets) |
| Amperage | 10–15A (combined across both outlets) |
| Voltage | 125V |
| Color | Black |
| Approvals | UL/cUL Listed |
Common Mining Uses
- Power inline fans, temperature controllers, or network gear from a UPS C13 outlet
- Run monitoring displays or Raspberry Pi nodes from a PDU
- Add standard 120V outlets to a mining rack without an extra power strip
Can I power a miner with this?
No. This cable provides standard 120V NEMA 5-15R outlets at up to 10–15A. It is designed for low-power accessories, not ASIC miners. Use a proper 240V power cable for your mining hardware.
How does the C14 end connect to power?
The C14 plug connects to any C13 outlet — commonly found on UPS units, PDUs, and server rack power strips. Plug the C14 into a C13 outlet, and you get two standard North American outlets on the other end.
D-Central Technologies — Bitcoin Mining Hackers since 2016. Every hash counts.
Can I power a miner with this?
No. This cable provides standard 120V NEMA 5-15R outlets at up to 10–15A. It is designed for low-power accessories, not ASIC miners. Use a proper 240V power cable for your mining hardware.
How does the C14 end connect to power?
The C14 plug connects to any C13 outlet — commonly found on UPS units, PDUs, and server rack power strips. Plug the C14 into a C13 outlet, and you get two standard North American outlets on the other end.
Avis
Il n’y a pas encore d’avis.