T451

Name: T451 Electronic Component | D-Central
Brand: D-Central Technologies
SKU: DC-CHIP-T451
Availability: InStock

Plage de prix : 4.50 $ à 6.75 $

Are you looking for a temperature sensor to help with your Antminer?

The T451 temperature sensor is the perfect solution for you! It’s integrated with a chip that makes it easy to repair your hash board. Plus, it works with all Antminers including the T9, S9, S11, S17, and T17.

Get back up and running fast with the T451 temperature sensor! This product is essential for keeping your Antminer running at its best performance.

Order now and we’ll ship it out to you right away.

Condition

Effacer

We accept:

Shipping calculated at checkout

Expédié depuis le Canada

Bitcoin accepté

Garantie incluse

Livraison gratuite 500$+

Paiement sécurisé

Experts en réparation en interne

Usually ships within 48 hours

UGS : DC-CHIP-T451 Catégorie : Puces ASIC Étiquettes : ASIC Chip, ASIC Repair, Replacement Part

Questions sur ce produit?

Parlez à un expert en minage → ou appelez 1-855-753-9997

Description

T451 Temperature Sensor Chip (TMP451AIDQFR) for ASIC Miner Hashboards

The T451 temperature sensor antminer hashboard is a reliable choice for Bitcoin mining operations.

The T451 is a high-accuracy digital temperature sensor chip used on ASIC miner hashboards to monitor operating temperatures in real time. Also known by its full part number TMP451AIDQFR, this chip is a critical component in the thermal management system of Bitcoin and Litecoin mining hardware. When the T451 fails, the miner cannot accurately read hashboard temperatures, leading to shutdowns, errors, or potentially damaging overheating.

Key Specifications

Part Number: TMP451AIDQFR (marking: T451)
Type: Digital temperature sensor with I2C/SMBus interface
Supply Voltage: 1.7V to 3.6V
Temperature Range: -40 C to +127 C
Accuracy: +/- 1 C (typical)
Resolution: Up to 12-bit
Package: SOT-23-6

Compatible Mining Hardware

The T451 temperature sensor is used on hashboards for the following ASIC miner models:

Bitmain Antminer: S9, T9, S11, S17, S17 Pro, T17, T17+, L3+, L7, Z15

This chip is one of several temperature sensor types used across Antminer hashboards. Other common temperature sensors include the TMP75, NCT218, S75, and LM75A. Always verify which sensor your specific hashboard uses before ordering replacements.

When You Need This Part

Temperature sensor failure is a common cause of hashboard errors during ASIC repair. When the T451 chip is damaged or non-functional, the hashboard will report incorrect temperature readings, often displaying 0 degrees or wildly inaccurate values. This causes the miner control board to either shut down the hashboard for safety or fail to regulate fan speeds properly.

Symptoms of a failed T451 include:

Temperature reading shows 0 or abnormal values in the miner dashboard
Hashboard fails temperature check during startup diagnostics
Miner reports temperature sensor error codes
Individual hashboard shuts down while others operate normally

Replacing the T451 requires surface-mount soldering skills and a hot air rework station. Apply no-clean flux, heat the failed chip at approximately 400 C, remove with tweezers, then align and solder the replacement chip.