MicroBT Whatsminer M10 vs Whatsminer M56S+
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| MicroBT Whatsminer M10 | Specification | Whatsminer M56S+ |
|---|---|---|
| 33.0 TH/s | Taux de hachage | 216.0 TH/s |
| 2,145 W | Consommation électrique | 5,060 W |
| 65.0 J/TH | Efficiency | 23.4 J/TH |
| — | Niveau de bruit | 50 dB |
| 8,550.0 kg | Weight | 13.0 kg |
| 7,319 BTU/hr | BTU Output | 17,265 BTU/hr |
| 26/100 | Home Mining Score | 44/100 |
| — | Release Year | — |
| SHA-256 | Algorithme | SHA-256 |
| MicroBT | Manufacturer | MicroBT |
Profitability Comparison
MicroBT Whatsminer M10
Whatsminer M56S+
Based on BTC price of $78,194 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Whatsminer M56S+ edges it: 5 of 6 factors go its way (efficacité, hashrate, score de minage domestique, niveau sonore, rapport qualité-prix). Where it pulls away hardest is 555% more hashrate (33.0 vs 216.0 TH/s). The MicroBT Whatsminer M10 claws back ground on consommation électrique. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Stripped to the numbers, this is how far apart the MicroBT Whatsminer M10 and Whatsminer M56S+ sit on each measurable spec:
- Whatsminer M56S+ 555% more hashrate (33.0 vs 216.0 TH/s)
- MicroBT Whatsminer M10 58% better power draw (2,145 vs 5,060 W)
- Whatsminer M56S+ 64% better efficacité (65.0 vs 23.4 J/TH)
- Whatsminer M56S+ 100% better weight (8,550.0 vs 13.0 kg)
- Whatsminer M56S+ 136% more heat output (7,319 vs 17,265 BTU/hr)
- Whatsminer M56S+ 69% more score de minage domestique (26.0 vs 44.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| MicroBT Whatsminer M10 | Metric | Whatsminer M56S+ |
|---|---|---|
| $2,500 | Upfront cost (MSRP) | $6,000 |
| -$3.96 | Daily net profit | -$4.37 |
| -$3,946 | Net after 1 year | -$7,596 |
| -$5,391 | Net after 2 years | -$9,191 |
| -$6,837 | Net after 3 years | -$10,787 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Whatsminer M56S+Score: 44/100. 50 dB noise level.
Best for Efficiency
Whatsminer M56S+23.4 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
MicroBT Whatsminer M10 vs Whatsminer M56S+: which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the MicroBT Whatsminer M10 is more profitable at $-3.96/day compared to $-4.37/day for the Whatsminer M56S+. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the MicroBT Whatsminer M10 or Whatsminer M56S+?
The Whatsminer M56S+ is quieter at 50 dB compared to the MicroBT Whatsminer M10 at 0 dB. For home mining, lower noise levels make a significant difference in livability.
MicroBT Whatsminer M10 vs Whatsminer M56S+: which fits a residential setup better?
The Whatsminer M56S+ scores 44/100 on our Home Mining Score (vs 26/100 for the MicroBT Whatsminer M10). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the MicroBT Whatsminer M10 and Whatsminer M56S+ on J/TH?
The MicroBT Whatsminer M10 runs at 65.0 J/TH while the Whatsminer M56S+ runs at 23.4 J/TH — a difference of 41.6 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 64% better efficacité (65.0 vs 23.4 J/TH).