C14 to 3x C13 Power Splitter Cable

Description

C14 To C13 Power Splitter

The C14 to c13 power splitter is a quality power solution for mining setups.

Split one IEC C14 power source into three C13 outlets. This splitter cable is built for mining racks and server environments where you need to distribute power from a single PDU or UPS outlet to multiple devices using standard IEC power connections.

Specifications
Connector A	IEC 60320 C14 (male plug)
Connector B	3x IEC 60320 C13 (female connectors)
Amperage	10A (combined across all outlets)
Voltage	250V
Color	Black
Approvals	UL/cUL Listed

Common Mining Uses

• Power multiple mining PSUs from a single PDU outlet when port density is limited
• Run auxiliary equipment (fans, controllers, network switches) alongside miners on the same circuit
• Reduce cable clutter in mining racks by consolidating power connections

Important: The total amperage drawn across all three C13 outlets must not exceed the rating of the source C14 connection (typically 10A at 250V). Do not use this to power multiple high-draw ASIC miners from a single outlet.

Can I daisy-chain multiple splitters?

Technically possible but not recommended. Daisy-chaining splitters increases the risk of exceeding the circuit’s amperage rating. Each splitter should connect directly to a dedicated PDU or UPS outlet.

Will this work at 240V?

Yes. IEC C14/C13 connectors are rated for 250V. This splitter works at both 120V and 240V, depending on your power source. Just respect the 10A combined load limit.

D-Central Technologies — Bitcoin Mining Hackers since 2016. Every hash counts.