Description
A curved 6-pin power header connector used on ASIC miner hashboards to deliver DC power from the PSU. This right-angle connector is soldered directly to the hashboard PCB and receives the power cable from the Bitmain APW power supply. Damaged or burnt power connectors are a common cause of hashboard failure — this is the exact replacement part to get your board back online.
| Specification | Details |
|---|---|
| Pin Count | 6-pin |
| Style | Curved / right-angle (PCB mount) |
| Function | Hashboard power delivery from PSU |
| Compatible Miners | Bitmain Antminer series (S9, S17, T17, S19, etc.) |
Key Features
- Direct replacement for burnt or damaged hashboard power connectors
- Curved/right-angle design matches factory PCB layout — drop-in fit
- Rated for the high current loads required by ASIC mining hashboards
- Common repair part — power connectors are among the most frequent failure points on hashboards
Compatibility
Fits Bitmain Antminer hashboards using the standard 6-pin curved power header. Common on S9, S17, T17, and S19 series miners. Verify your hashboard’s specific connector type before ordering.
Why do 6-pin power connectors fail?
Power connectors carry high current continuously. Over time, loose connections or dust buildup create resistance, which generates heat. This heat damages the connector and surrounding PCB traces. Burnt power connectors are one of the most common ASIC repair issues.
Should I replace the PCB traces too?
If the PCB traces around the connector show burn damage (dark discolouration, lifted pads), simply replacing the connector may not be sufficient. Damaged traces need to be repaired with jumper wires or the board may need professional rework. D-Central offers hashboard repair services for complex cases.
Avis
Il n’y a pas encore d’avis.