Description
The Bitmain APW9 is a high-efficiency power supply unit originally designed for the Antminer T17, S17, and S17 Pro. Delivering up to 95% power efficiency, this PSU provides stable, clean power for demanding SHA-256 mining operations. With a Loki Kit modification, the APW9 can also power Antminer 19-series miners — extending its usefulness well beyond the hardware generation it was built for.
| Specification | Details |
|---|---|
| Model | Bitmain APW9 |
| Designed For | Antminer T17, S17, S17 Pro |
| Also Compatible With | Antminer 19-series (with Loki Kit modification) |
| Rated Input Voltage | 220-240V AC (also usable on 110-120V) |
| Power Efficiency | Up to 95% |
| Protection Features | Overheat, overcurrent, overvoltage protection |
| Condition | Reconditioned by D-Central |
| Warranty | 7-day DOA warranty |
95% Power Efficiency
In Bitcoin mining, every watt that does not reach your hashboards is wasted money. The APW9’s 95% efficiency rating means minimal power loss in the conversion from AC wall power to the DC your miner needs. Over months of 24/7 operation, that efficiency advantage adds up significantly on your electricity bill.
Extend Its Life with a Loki Kit
The APW9 was built for the 17-series, but with a simple Loki Kit modification, it can power Antminer 19-series miners too. This means you can upgrade your miner without scrapping a perfectly good PSU. Contact D-Central for modification instructions and Loki Kit availability.
110V and 240V Adaptable
While rated for 220-240V, the APW9 can also operate on 110-120V power sources. This adaptability makes it suitable for home mining setups in North America where 240V circuits may not be readily available. On 110V, power output may be limited — check your miner’s requirements to ensure compatibility at your available voltage.
Built-In Safety Features
The APW9 includes overheat protection, overcurrent protection, and overvoltage protection. These are not luxury features — they are essential safeguards for hardware that runs continuously. A PSU failure can damage expensive hashboards; these protection circuits prevent that.
What’s Included
- 1x Bitmain APW9 Power Supply Unit (reconditioned)
- Power output cables for Antminer connection
Frequently Asked Questions
Can I use this PSU on 110V for an S19?
The APW9 can run on 110V, but total available wattage is reduced compared to 240V operation. For a full three-board S19, 240V is recommended. For a single-hashboard Loki build, 110V may be sufficient. Contact our team to discuss your specific configuration.
What is the Loki Kit modification?
The Loki Kit from Pivotal Pleb Tech modifies the PSU’s voltage output to make it compatible with 19-series hashboards. It is a straightforward modification that D-Central can provide guidance on. The Loki Kit is sold separately in our shop.
Is this PSU new or reconditioned?
Reconditioned by D-Central. Each unit is inspected, tested, and verified to deliver rated power output before shipping. We provide a 7-day DOA warranty.
What is the difference between APW9 and APW9+?
The APW9+ is the enhanced version designed for the T17e/S17e/T17+/S17+ models, offering a higher 3600W output. Both share the same reliability and can be modified with a Loki Kit for 19-series compatibility.
Why Buy from D-Central?
D-Central Technologies reconditions every PSU in our Canadian facility and tests it before shipping. We do not resell untested units from pallets. Our ASIC repair team has been powering miners since 2016, and we know that a reliable PSU is the foundation of every stable mining operation. Every hash counts.
Avis
Il n’y a pas encore d’avis.