Innosilicon A10 Pro ETH (500Mh)

Taux de hachage 500.0 MH/s Puissance 960 W Efficiency 1,920,000.0 J/TH

Innosilicon T3 43T

Taux de hachage 43.0 TH/s Puissance 2,100 W Efficiency 48.8 J/TH

Innosilicon A10 Pro ETH (500Mh) vs Innosilicon T3 43T

Side-by-side specs, profitability, and home mining comparison.

Specifications Comparison

Innosilicon A10 Pro ETH (500Mh)	Specification	Innosilicon T3 43T
500.0 MH/s	Taux de hachage	43.0 TH/s
960 W	Consommation électrique	2,100 W
1,920,000.0 J/TH	Efficiency	48.8 J/TH
—	Niveau de bruit	—
8,100.0 kg	Weight	10,000.0 kg
3,276 BTU/hr	BTU Output	7,165 BTU/hr
31/100	Home Mining Score	26/100
—	Release Year	—
EtHash	Algorithme	SHA-256
Innosilicon	Manufacturer	Innosilicon

Profitability Comparison

Electricity Rate:

$/kWh

Innosilicon A10 Pro ETH (500Mh)

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$2.30

Daily Profit -$2.30

Monthly -$69.12

Yearly -$840.95

Innosilicon T3 43T

Daily Revenue 0.00001979 BTC $1.55

Daily Electricity -$5.04

Daily Profit -$3.49

Monthly -$104.85

Yearly -$1,275.64

Based on BTC price of $78,083 and current network difficulty as of May 16, 2026. Actual results vary.

Verdict

Selon notre analyse multifactorielle, le Innosilicon T3 43T l'emporte sur 3 des 5 facteurs (efficacité, hashrate, rapport qualité-prix). Where it pulls away hardest is 8599900% more hashrate (0.0 vs 43.0 TH/s). The Innosilicon A10 Pro ETH (500Mh) holds the edge in consommation électrique and score de minage domestique. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.

Winner: Innosilicon T3 43T — l'emporte sur 3 des 5 facteurs

Spec Deltas

Stripped to the numbers, this is how far apart the Innosilicon A10 Pro ETH (500Mh) and Innosilicon T3 43T sit on each measurable spec:

Innosilicon T3 43T 8599900% more hashrate (0.0 vs 43.0 TH/s)
Innosilicon A10 Pro ETH (500Mh) 54% better power draw (960 vs 2,100 W)
Innosilicon T3 43T 100% better efficacité (1,920,000.0 vs 48.8 J/TH)
Innosilicon A10 Pro ETH (500Mh) 19% better weight (8,100 vs 10,000 kg)
Innosilicon T3 43T 119% more heat output (3,276 vs 7,165 BTU/hr)
Innosilicon A10 Pro ETH (500Mh) 19% more score de minage domestique (31.0 vs 26.0)

Cost & ROI Over Time

Sticker price versus what the miner actually earns back: the table below projects cumulative net profit at a $0.10/kWh electricity rate.

Innosilicon A10 Pro ETH (500Mh)	Metric	Innosilicon T3 43T
$469	Upfront cost (MSRP)	$1,500
-$2.30	Daily net profit	-$3.49
-$1,310	Net after 1 year	-$2,776
-$2,151	Net after 2 years	-$4,051
-$2,992	Net after 3 years	-$5,327
Does not pay back at current rates (negative daily profit)	Payback period	Does not pay back at current rates (negative daily profit)

Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.

Best For...

Best for Profitability

Tie

Both miners produce similar daily profit.

Best for Home Mining

Innosilicon A10 Pro ETH (500Mh)

Score: 31/100. 0 dB noise level.

Best for Efficiency

Innosilicon T3 43T

48.8 J/TH — lower electricity cost per terahash.

Frequently Asked Questions

Is the Innosilicon A10 Pro ETH (500Mh) or Innosilicon T3 43T more profitable?

At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro ETH (500Mh) is more profitable at $-2.30/day compared to $-3.49/day for the Innosilicon T3 43T. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.

Which is quieter, the Innosilicon A10 Pro ETH (500Mh) or Innosilicon T3 43T?

Both miners have similar noise levels. Check the specs table above for exact decibel readings.

For mining at home, should I pick the Innosilicon A10 Pro ETH (500Mh) or the Innosilicon T3 43T?

The Innosilicon A10 Pro ETH (500Mh) scores 31/100 on our Home Mining Score (vs 26/100 for the Innosilicon T3 43T). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.

What is the efficiency difference between Innosilicon A10 Pro ETH (500Mh) and Innosilicon T3 43T?

The Innosilicon A10 Pro ETH (500Mh) runs at 1,920,000.0 J/TH while the Innosilicon T3 43T runs at 48.8 J/TH — a difference of 1,919,951.2 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficacité (1,920,000.0 vs 48.8 J/TH).

Compare Innosilicon A10 Pro ETH (500Mh) with...

Compare Innosilicon T3 43T with...

Shop Miners Browse our full catalog of ASIC miners, Bitaxe, and accessories. Réparation ASIC 2,500+ miners repaired. Expert diagnostics and board-level repair. Miner Database Compare 500+ miners with live profitability data.