Innosilicon A11 Pro ETH (1500Mh)
Innosilicon A11 Pro ETH (1500Mh) vs Jasminer X16-P
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A11 Pro ETH (1500Mh) | Specification | Jasminer X16-P |
|---|---|---|
| 1.5 GH/s | Taux de hachage | 5.8 GH/s |
| 2,350 W | Consommation électrique | 1,900 W |
| 1,566,666.7 J/TH | Efficiency | 327,586.2 J/TH |
| — | Niveau de bruit | — |
| — | Weight | 14.0 kg |
| 8,018 BTU/hr | BTU Output | 6,483 BTU/hr |
| 26/100 | Home Mining Score | 28/100 |
| — | Release Year | — |
| EtHash | Algorithme | EtHash |
| Innosilicon | Manufacturer | Jasminer |
Profitability Comparison
Innosilicon A11 Pro ETH (1500Mh)
Jasminer X16-P
Based on BTC price of $78,195 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Weighing six performance factors, the Jasminer X16-P comes out ahead — it takes 5 of 5 (efficacité, hashrate, consommation électrique, score de minage domestique, rapport qualité-prix). Its biggest concrete edge: 79% better efficacité (1,566,667 vs 327,586 J/TH). Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
The Innosilicon A11 Pro ETH (1500Mh) and Jasminer X16-P diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Jasminer X16-P 287% more hashrate (0.0 vs 0.0 TH/s)
- Jasminer X16-P 19% better power draw (2,350 vs 1,900 W)
- Jasminer X16-P 79% better efficacité (1,566,667 vs 327,586 J/TH)
- Innosilicon A11 Pro ETH (1500Mh) 24% more heat output (8,018 vs 6,483 BTU/hr)
- Jasminer X16-P 8% more score de minage domestique (26.0 vs 28.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A11 Pro ETH (1500Mh) | Metric | Jasminer X16-P |
|---|---|---|
| $1,200 | Upfront cost (MSRP) | $2,550 |
| -$5.64 | Daily net profit | -$4.56 |
| -$3,259 | Net after 1 year | -$4,214 |
| -$5,317 | Net after 2 years | -$5,879 |
| -$7,376 | Net after 3 years | -$7,543 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Jasminer X16-PScore: 28/100. 0 dB noise level.
Best for Efficiency
Jasminer X16-P327,586.2 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Innosilicon A11 Pro ETH (1500Mh) or Jasminer X16-P more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Jasminer X16-P is more profitable at $-4.56/day compared to $-5.64/day for the Innosilicon A11 Pro ETH (1500Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Innosilicon A11 Pro ETH (1500Mh) or Jasminer X16-P?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Innosilicon A11 Pro ETH (1500Mh) or the Jasminer X16-P?
The Jasminer X16-P scores 28/100 on our Home Mining Score (vs 26/100 for the Innosilicon A11 Pro ETH (1500Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
What is the efficiency difference between Innosilicon A11 Pro ETH (1500Mh) and Jasminer X16-P?
The Innosilicon A11 Pro ETH (1500Mh) runs at 1,566,666.7 J/TH while the Jasminer X16-P runs at 327,586.2 J/TH — a difference of 1,239,080.5 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 79% better efficacité (1,566,667 vs 327,586 J/TH).
Compare Innosilicon A11 Pro ETH (1500Mh) with...
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A11 Pro
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A4 Dominator
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A4+ LTCMaster