Bitmain Antminer L11 (20Gh) vs Elphapex DG1 Lite
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Bitmain Antminer L11 (20Gh) | Specification | Elphapex DG1 Lite |
|---|---|---|
| 20.0 GH/s | Taux de hachage | 11.0 GH/s |
| 3,680 W | Consommation électrique | 3,410 W |
| 184,000.0 J/TH | Efficiency | 310,000.0 J/TH |
| 75 dB | Niveau de bruit | 75 dB |
| — | Weight | 18.3 kg |
| 12,556 BTU/hr | BTU Output | 11,635 BTU/hr |
| 30/100 | Home Mining Score | 36/100 |
| — | Release Year | — |
| Scrypt | Algorithme | Scrypt |
| Bitmain | Manufacturer | Elphapex |
Profitability Comparison
Bitmain Antminer L11 (20Gh)
Elphapex DG1 Lite
Based on BTC price of $78,095 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Weighing six performance factors, the Bitmain Antminer L11 (20Gh) comes out ahead — it takes 2 of 4 (efficacité, hashrate). Where it pulls away hardest is 82% more hashrate (0.0 vs 0.0 TH/s). The Elphapex DG1 Lite claws back ground on consommation électrique and score de minage domestique. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.
Spec Deltas
Here is every spec where the Bitmain Antminer L11 (20Gh) and Elphapex DG1 Lite actually differ, with the gap quantified:
- Bitmain Antminer L11 (20Gh) 82% more hashrate (0.0 vs 0.0 TH/s)
- Elphapex DG1 Lite 7% better power draw (3,680 vs 3,410 W)
- Bitmain Antminer L11 (20Gh) 41% better efficacité (184,000 vs 310,000 J/TH)
- Bitmain Antminer L11 (20Gh) 8% more heat output (12,556 vs 11,635 BTU/hr)
- Elphapex DG1 Lite 20% more score de minage domestique (30.0 vs 36.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Bitmain Antminer L11 (20Gh) | Metric | Elphapex DG1 Lite |
|---|---|---|
| $6,199 | Upfront cost (MSRP) | — |
| -$8.83 | Daily net profit | -$8.18 |
| -$9,422 | Net after 1 year | -$2,987 |
| -$12,646 | Net after 2 years | -$5,974 |
| -$15,869 | Net after 3 years | -$8,961 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Elphapex DG1 LiteScore: 36/100. 75 dB noise level.
Best for Efficiency
Bitmain Antminer L11 (20Gh)184,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Bitmain Antminer L11 (20Gh) or the Elphapex DG1 Lite?
At the current BTC price and a $0.10/kWh electricity rate, the Elphapex DG1 Lite is more profitable at $-8.18/day compared to $-8.83/day for the Bitmain Antminer L11 (20Gh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Bitmain Antminer L11 (20Gh) vs Elphapex DG1 Lite: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Bitmain Antminer L11 (20Gh) vs Elphapex DG1 Lite: which fits a residential setup better?
The Elphapex DG1 Lite scores 36/100 on our Home Mining Score (vs 30/100 for the Bitmain Antminer L11 (20Gh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Bitmain Antminer L11 (20Gh) vs Elphapex DG1 Lite: how much does the efficiency gap matter?
The Bitmain Antminer L11 (20Gh) runs at 184,000.0 J/TH while the Elphapex DG1 Lite runs at 310,000.0 J/TH — a difference of 126,000.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 41% better efficacité (184,000 vs 310,000 J/TH).