Elphapex DG1+ vs Goldshell LT5
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Elphapex DG1+ | Specification | Goldshell LT5 |
|---|---|---|
| 14,400.0 MH/s | Taux de hachage | 2.1 GH/s |
| 3,920 W | Consommation électrique | 2,080 W |
| 272,222.2 J/TH | Efficiency | 1,014,634.2 J/TH |
| 75 dB | Niveau de bruit | — |
| 18.3 kg | Weight | 8,500.0 kg |
| 13,375 BTU/hr | BTU Output | 7,097 BTU/hr |
| 30/100 | Home Mining Score | 26/100 |
| — | Release Year | — |
| Scrypt | Algorithme | Scrypt |
| Elphapex | Manufacturer | Goldshell |
Profitability Comparison
Elphapex DG1+
Goldshell LT5
Based on BTC price of $78,217 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Elphapex DG1+ edges it: 5 of 6 factors go its way (efficacité, hashrate, score de minage domestique, niveau sonore, rapport qualité-prix). Where it pulls away hardest is 602% more hashrate (0.0 vs 0.0 TH/s). The Goldshell LT5 claws back ground on consommation électrique. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
The Elphapex DG1+ and Goldshell LT5 diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Elphapex DG1+ 602% more hashrate (0.0 vs 0.0 TH/s)
- Goldshell LT5 47% better power draw (3,920 vs 2,080 W)
- Elphapex DG1+ 73% better efficacité (272,222 vs 1,014,634 J/TH)
- Elphapex DG1+ 100% better weight (18.3 vs 8,500.0 kg)
- Elphapex DG1+ 88% more heat output (13,375 vs 7,097 BTU/hr)
- Elphapex DG1+ 15% more score de minage domestique (30.0 vs 26.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Elphapex DG1+ | Metric | Goldshell LT5 |
|---|---|---|
| $8,500 | Upfront cost (MSRP) | $8,364 |
| -$9.41 | Daily net profit | -$4.99 |
| -$11,934 | Net after 1 year | -$10,186 |
| -$15,367 | Net after 2 years | -$12,008 |
| -$18,801 | Net after 3 years | -$13,830 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Elphapex DG1+Score: 30/100. 75 dB noise level.
Best for Efficiency
Elphapex DG1+272,222.2 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Elphapex DG1+ or Goldshell LT5 more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Goldshell LT5 is more profitable at $-4.99/day compared to $-9.41/day for the Elphapex DG1+. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Is the Elphapex DG1+ or the Goldshell LT5 better for noise-sensitive spaces?
The Elphapex DG1+ is quieter at 75 dB compared to the Goldshell LT5 at 0 dB. For home mining, lower noise levels make a significant difference in livability.
Elphapex DG1+ vs Goldshell LT5: which fits a residential setup better?
The Elphapex DG1+ scores 30/100 on our Home Mining Score (vs 26/100 for the Goldshell LT5). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Elphapex DG1+ and Goldshell LT5 on J/TH?
The Elphapex DG1+ runs at 272,222.2 J/TH while the Goldshell LT5 runs at 1,014,634.2 J/TH — a difference of 742,411.9 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 73% better efficacité (272,222 vs 1,014,634 J/TH).