Innosilicon A10 ETHMaster (500Mh)

Taux de hachage 500.0 MH/s Puissance 750 W Efficiency 1,500,000.0 J/TH

Innosilicon A10 Pro+ ETH (750Mh)

Taux de hachage 750.0 MH/s Puissance 1,350 W Efficiency 1,800,000.0 J/TH

Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)

Side-by-side specs, profitability, and home mining comparison.

Specifications Comparison

Innosilicon A10 ETHMaster (500Mh)	Specification	Innosilicon A10 Pro+ ETH (750Mh)
500.0 MH/s	Taux de hachage	750.0 MH/s
750 W	Consommation électrique	1,350 W
1,500,000.0 J/TH	Efficiency	1,800,000.0 J/TH
—	Niveau de bruit	—
8,100.0 kg	Weight	8,100.0 kg
2,559 BTU/hr	BTU Output	4,606 BTU/hr
30/100	Home Mining Score	31/100
—	Release Year	—
Etchash	Algorithme	EtHash
Innosilicon	Manufacturer	Innosilicon

Profitability Comparison

Electricity Rate:

$/kWh

Innosilicon A10 ETHMaster (500Mh)

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$1.80

Daily Profit -$1.80

Monthly -$54.00

Yearly -$656.99

Innosilicon A10 Pro+ ETH (750Mh)

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$3.24

Daily Profit -$3.24

Monthly -$97.20

Yearly -$1,182.59

Based on BTC price of $78,158 and current network difficulty as of May 16, 2026. Actual results vary.

Verdict

Weighing six performance factors, the Innosilicon A10 ETHMaster (500Mh) comes out ahead — it takes 2 of 4 (efficacité, consommation électrique). Its biggest concrete edge: 44% better power draw (750 vs 1,350 W). The Innosilicon A10 Pro+ ETH (750Mh) claws back ground on score de minage domestique and rapport qualité-prix. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.

Winner: Innosilicon A10 ETHMaster (500Mh) — l'emporte sur 2 des 4 facteurs

Spec Deltas

The Innosilicon A10 ETHMaster (500Mh) and Innosilicon A10 Pro+ ETH (750Mh) diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":

Innosilicon A10 Pro+ ETH (750Mh) 50% more hashrate (0.0 vs 0.0 TH/s)
Innosilicon A10 ETHMaster (500Mh) 44% better power draw (750 vs 1,350 W)
Innosilicon A10 ETHMaster (500Mh) 17% better efficacité (1,500,000 vs 1,800,000 J/TH)
Innosilicon A10 Pro+ ETH (750Mh) 80% more heat output (2,559 vs 4,606 BTU/hr)
Innosilicon A10 Pro+ ETH (750Mh) 3% more score de minage domestique (30.0 vs 31.0)

Cost & ROI Over Time

Sticker price versus what the miner actually earns back: the table below projects cumulative net profit at a $0.10/kWh electricity rate.

Innosilicon A10 ETHMaster (500Mh)	Metric	Innosilicon A10 Pro+ ETH (750Mh)
$2,150	Upfront cost (MSRP)	$800
-$1.80	Daily net profit	-$3.24
-$2,807	Net after 1 year	-$1,983
-$3,464	Net after 2 years	-$3,165
-$4,121	Net after 3 years	-$4,348
Does not pay back at current rates (negative daily profit)	Payback period	Does not pay back at current rates (negative daily profit)

Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.

Best For...

Best for Profitability

Tie

Both miners produce similar daily profit.

Best for Home Mining

Innosilicon A10 Pro+ ETH (750Mh)

Score: 31/100. 0 dB noise level.

Best for Efficiency

Innosilicon A10 ETHMaster (500Mh)

1,500,000.0 J/TH — lower electricity cost per terahash.

Frequently Asked Questions

Is the Innosilicon A10 ETHMaster (500Mh) or Innosilicon A10 Pro+ ETH (750Mh) more profitable?

At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 ETHMaster (500Mh) is more profitable at $-1.80/day compared to $-3.24/day for the Innosilicon A10 Pro+ ETH (750Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.

Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh): which runs at a lower noise level?

Both miners have similar noise levels. Check the specs table above for exact decibel readings.

For mining at home, should I pick the Innosilicon A10 ETHMaster (500Mh) or the Innosilicon A10 Pro+ ETH (750Mh)?

The Innosilicon A10 Pro+ ETH (750Mh) scores 31/100 on our Home Mining Score (vs 30/100 for the Innosilicon A10 ETHMaster (500Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.

Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh): how much does the efficiency gap matter?

The Innosilicon A10 ETHMaster (500Mh) runs at 1,500,000.0 J/TH while the Innosilicon A10 Pro+ ETH (750Mh) runs at 1,800,000.0 J/TH — a difference of 300,000.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 17% better efficacité (1,500,000 vs 1,800,000 J/TH).

Compare Innosilicon A10 ETHMaster (500Mh) with...

Compare Innosilicon A10 Pro+ ETH (750Mh) with...

Shop Miners Browse our full catalog of ASIC miners, Bitaxe, and accessories. Réparation ASIC 2,500+ miners repaired. Expert diagnostics and board-level repair. Miner Database Compare 500+ miners with live profitability data.