Innosilicon A11 Pro ETH (1500Mh)
Innosilicon A11 Pro ETH (1500Mh) vs iPollo V1 Mini
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A11 Pro ETH (1500Mh) | Specification | iPollo V1 Mini |
|---|---|---|
| 1.5 GH/s | Taux de hachage | 300.0 MH/s |
| 2,350 W | Consommation électrique | 240 W |
| 1,566,666.7 J/TH | Efficiency | 800,000.0 J/TH |
| — | Niveau de bruit | — |
| — | Weight | 2,100.0 kg |
| 8,018 BTU/hr | BTU Output | 819 BTU/hr |
| 26/100 | Home Mining Score | 31/100 |
| — | Release Year | — |
| EtHash | Algorithme | EtHash |
| Innosilicon | Manufacturer | iPollo |
Profitability Comparison
Innosilicon A11 Pro ETH (1500Mh)
iPollo V1 Mini
Based on BTC price of $78,223 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Weighing six performance factors, the iPollo V1 Mini comes out ahead — it takes 3 of 5 (efficacité, consommation électrique, score de minage domestique). The standout gap is 90% better power draw (2,350 vs 240 W) in the iPollo V1 Mini's favour. The Innosilicon A11 Pro ETH (1500Mh) holds the edge in hashrate and rapport qualité-prix. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
Stripped to the numbers, this is how far apart the Innosilicon A11 Pro ETH (1500Mh) and iPollo V1 Mini sit on each measurable spec:
- Innosilicon A11 Pro ETH (1500Mh) 400% more hashrate (0.0 vs 0.0 TH/s)
- iPollo V1 Mini 90% better power draw (2,350 vs 240 W)
- iPollo V1 Mini 49% better efficacité (1,566,667 vs 800,000 J/TH)
- Innosilicon A11 Pro ETH (1500Mh) 879% more heat output (8,018 vs 819 BTU/hr)
- iPollo V1 Mini 19% more score de minage domestique (26.0 vs 31.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A11 Pro ETH (1500Mh) | Metric | iPollo V1 Mini |
|---|---|---|
| $1,200 | Upfront cost (MSRP) | $300 |
| -$5.64 | Daily net profit | -$0.58 |
| -$3,259 | Net after 1 year | -$510 |
| -$5,317 | Net after 2 years | -$720 |
| -$7,376 | Net after 3 years | -$931 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
iPollo V1 MiniScore: 31/100. 0 dB noise level.
Best for Efficiency
iPollo V1 Mini800,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Innosilicon A11 Pro ETH (1500Mh) or iPollo V1 Mini more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the iPollo V1 Mini is more profitable at $-0.58/day compared to $-5.64/day for the Innosilicon A11 Pro ETH (1500Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Innosilicon A11 Pro ETH (1500Mh) or iPollo V1 Mini?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Innosilicon A11 Pro ETH (1500Mh) or the iPollo V1 Mini?
The iPollo V1 Mini scores 31/100 on our Home Mining Score (vs 26/100 for the Innosilicon A11 Pro ETH (1500Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Innosilicon A11 Pro ETH (1500Mh) and iPollo V1 Mini on J/TH?
The Innosilicon A11 Pro ETH (1500Mh) runs at 1,566,666.7 J/TH while the iPollo V1 Mini runs at 800,000.0 J/TH — a difference of 766,666.7 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 49% better efficacité (1,566,667 vs 800,000 J/TH).
Compare Innosilicon A11 Pro ETH (1500Mh) with...
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A11 Pro
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A4 Dominator
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A4+ LTCMaster