Bitmain Antminer G2 vs Jasminer X4
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Bitmain Antminer G2 | Specification | Jasminer X4 |
|---|---|---|
| 220.0 MH/s | Taux de hachage | 2.5 GH/s |
| 1,200 W | Consommation électrique | 1,200 W |
| 5,454,545.5 J/TH | Efficiency | 480,000.0 J/TH |
| — | Niveau de bruit | — |
| 15,000.0 kg | Weight | — |
| 4,094 BTU/hr | BTU Output | 4,094 BTU/hr |
| 31/100 | Home Mining Score | 31/100 |
| — | Release Year | — |
| Etchash | Algorithme | Etchash |
| Bitmain | Manufacturer | Jasminer |
Profitability Comparison
Bitmain Antminer G2
Jasminer X4
Based on BTC price of $78,195 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Our scoring model gives the nod to the Jasminer X4, which leads on 2 of 2 weighted factors (efficacité, hashrate). Its biggest concrete edge: 1036% more hashrate (0.0 vs 0.0 TH/s). Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
The Bitmain Antminer G2 and Jasminer X4 diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Jasminer X4 1036% more hashrate (0.0 vs 0.0 TH/s)
- Jasminer X4 91% better efficacité (5,454,545 vs 480,000 J/TH)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Bitmain Antminer G2 | Metric | Jasminer X4 |
|---|---|---|
| — | Upfront cost (MSRP) | $999 |
| -$2.88 | Daily net profit | -$2.88 |
| -$1,051 | Net after 1 year | -$2,050 |
| -$2,102 | Net after 2 years | -$3,101 |
| -$3,154 | Net after 3 years | -$4,153 |
| — | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
TieBoth miners are equally suitable for home use.
Best for Efficiency
Jasminer X4480,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Bitmain Antminer G2 or Jasminer X4 more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Jasminer X4 is more profitable at $-2.88/day compared to $-2.88/day for the Bitmain Antminer G2. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Bitmain Antminer G2 vs Jasminer X4: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Bitmain Antminer G2 or the Jasminer X4?
Both miners score similarly on our Home Mining Score. Consider your specific constraints (noise tolerance, available power, heat needs) to decide.
How far apart are the Bitmain Antminer G2 and Jasminer X4 on J/TH?
The Bitmain Antminer G2 runs at 5,454,545.5 J/TH while the Jasminer X4 runs at 480,000.0 J/TH — a difference of 4,974,545.5 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 91% better efficacité (5,454,545 vs 480,000 J/TH).