Goldshell LT5 Pro vs FusionSilicon X6 Miner
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Goldshell LT5 Pro | Specification | FusionSilicon X6 Miner |
|---|---|---|
| 2.5 GH/s | Taux de hachage | 860.0 MH/s |
| 3,100 W | Consommation électrique | 1,079 W |
| 1,265,306.1 J/TH | Efficiency | 1,254,651.2 J/TH |
| — | Niveau de bruit | — |
| 8,500.0 kg | Weight | 4,300.0 kg |
| 10,577 BTU/hr | BTU Output | 3,682 BTU/hr |
| 22/100 | Home Mining Score | 31/100 |
| — | Release Year | — |
| Scrypt | Algorithme | Scrypt |
| Goldshell | Manufacturer | FusionSilicon |
Profitability Comparison
Goldshell LT5 Pro
FusionSilicon X6 Miner
Based on BTC price of $78,223 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the FusionSilicon X6 Miner edges it: 3 of 4 factors go its way (efficacité, consommation électrique, score de minage domestique). Where it pulls away hardest is 65% better power draw (3,100 vs 1,079 W). That said, the Goldshell LT5 Pro isn't beaten everywhere — it still wins hashrate. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Here is every spec where the Goldshell LT5 Pro and FusionSilicon X6 Miner actually differ, with the gap quantified:
- Goldshell LT5 Pro 185% more hashrate (0.0 vs 0.0 TH/s)
- FusionSilicon X6 Miner 65% better power draw (3,100 vs 1,079 W)
- FusionSilicon X6 Miner 1% better efficacité (1,265,306 vs 1,254,651 J/TH)
- FusionSilicon X6 Miner 49% better weight (8,500 vs 4,300 kg)
- Goldshell LT5 Pro 187% more heat output (10,577 vs 3,682 BTU/hr)
- FusionSilicon X6 Miner 41% more score de minage domestique (22.0 vs 31.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Goldshell LT5 Pro | Metric | FusionSilicon X6 Miner |
|---|---|---|
| $800 | Upfront cost (MSRP) | — |
| -$7.44 | Daily net profit | -$2.59 |
| -$3,516 | Net after 1 year | -$945 |
| -$6,231 | Net after 2 years | -$1,890 |
| -$8,947 | Net after 3 years | -$2,836 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
FusionSilicon X6 MinerScore: 31/100. 0 dB noise level.
Best for Efficiency
FusionSilicon X6 Miner1,254,651.2 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Goldshell LT5 Pro or FusionSilicon X6 Miner more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the FusionSilicon X6 Miner is more profitable at $-2.59/day compared to $-7.44/day for the Goldshell LT5 Pro. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Goldshell LT5 Pro or FusionSilicon X6 Miner?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Goldshell LT5 Pro or the FusionSilicon X6 Miner?
The FusionSilicon X6 Miner scores 31/100 on our Home Mining Score (vs 22/100 for the Goldshell LT5 Pro). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Goldshell LT5 Pro and FusionSilicon X6 Miner on J/TH?
The Goldshell LT5 Pro runs at 1,265,306.1 J/TH while the FusionSilicon X6 Miner runs at 1,254,651.2 J/TH — a difference of 10,655.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 1% better efficacité (1,265,306 vs 1,254,651 J/TH).