Innosilicon A10 Pro ETH (500Mh)

Taux de hachage 500.0 MH/s Puissance 960 W Efficiency 1,920,000.0 J/TH

Innosilicon T3 50T

Taux de hachage 50.0 TH/s Puissance 3,100 W Efficiency 62.0 J/TH

Innosilicon A10 Pro ETH (500Mh) vs Innosilicon T3 50T

Side-by-side specs, profitability, and home mining comparison.

Specifications Comparison

Innosilicon A10 Pro ETH (500Mh)	Specification	Innosilicon T3 50T
500.0 MH/s	Taux de hachage	50.0 TH/s
960 W	Consommation électrique	3,100 W
1,920,000.0 J/TH	Efficiency	62.0 J/TH
—	Niveau de bruit	—
8,100.0 kg	Weight	10,000.0 kg
3,276 BTU/hr	BTU Output	10,577 BTU/hr
31/100	Home Mining Score	22/100
—	Release Year	—
EtHash	Algorithme	SHA-256
Innosilicon	Manufacturer	Innosilicon

Profitability Comparison

Electricity Rate:

$/kWh

Innosilicon A10 Pro ETH (500Mh)

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$2.30

Daily Profit -$2.30

Monthly -$69.12

Yearly -$840.95

Innosilicon T3 50T

Daily Revenue 0.00002301 BTC $1.77

Daily Electricity -$7.44

Daily Profit -$5.67

Monthly -$170.18

Yearly -$2,070.50

Based on BTC price of $76,813 and current network difficulty as of May 18, 2026. Actual results vary.

Verdict

Selon notre analyse multifactorielle, le Innosilicon T3 50T l'emporte sur 2 des 4 facteurs (efficacité, hashrate). The standout gap is 9999900% more hashrate (0.0 vs 50.0 TH/s) in the Innosilicon T3 50T's favour. The Innosilicon A10 Pro ETH (500Mh) claws back ground on consommation électrique and score de minage domestique. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.

Winner: Innosilicon T3 50T — l'emporte sur 2 des 4 facteurs

Spec Deltas

Here is every spec where the Innosilicon A10 Pro ETH (500Mh) and Innosilicon T3 50T actually differ, with the gap quantified:

Innosilicon T3 50T 9999900% more hashrate (0.0 vs 50.0 TH/s)
Innosilicon A10 Pro ETH (500Mh) 69% better power draw (960 vs 3,100 W)
Innosilicon T3 50T 100% better efficacité (1,920,000.0 vs 62.0 J/TH)
Innosilicon A10 Pro ETH (500Mh) 19% better weight (8,100 vs 10,000 kg)
Innosilicon T3 50T 223% more heat output (3,276 vs 10,577 BTU/hr)
Innosilicon A10 Pro ETH (500Mh) 41% more score de minage domestique (31.0 vs 22.0)

Cost & ROI Over Time

Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.

Innosilicon A10 Pro ETH (500Mh)	Metric	Innosilicon T3 50T
$469	Upfront cost (MSRP)	—
-$2.30	Daily net profit	-$5.67
-$1,310	Net after 1 year	-$2,070
-$2,151	Net after 2 years	-$4,141
-$2,992	Net after 3 years	-$6,211
Does not pay back at current rates (negative daily profit)	Payback period	—

Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.

Best For...

Best for Profitability

Tie

Both miners produce similar daily profit.

Best for Home Mining

Innosilicon A10 Pro ETH (500Mh)

Score: 31/100. 0 dB noise level.

Best for Efficiency

Innosilicon T3 50T

62.0 J/TH — lower electricity cost per terahash.

Frequently Asked Questions

Which makes more money, the Innosilicon A10 Pro ETH (500Mh) or the Innosilicon T3 50T?

At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro ETH (500Mh) is more profitable at $-2.30/day compared to $-5.67/day for the Innosilicon T3 50T. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.

Which is quieter, the Innosilicon A10 Pro ETH (500Mh) or Innosilicon T3 50T?

Both miners have similar noise levels. Check the specs table above for exact decibel readings.

Which is better for home mining, the Innosilicon A10 Pro ETH (500Mh) or Innosilicon T3 50T?

The Innosilicon A10 Pro ETH (500Mh) scores 31/100 on our Home Mining Score (vs 22/100 for the Innosilicon T3 50T). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.

How far apart are the Innosilicon A10 Pro ETH (500Mh) and Innosilicon T3 50T on J/TH?

The Innosilicon A10 Pro ETH (500Mh) runs at 1,920,000.0 J/TH while the Innosilicon T3 50T runs at 62.0 J/TH — a difference of 1,919,938.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficacité (1,920,000.0 vs 62.0 J/TH).

Compare Innosilicon A10 Pro ETH (500Mh) with...

Compare Innosilicon T3 50T with...

Shop Miners Browse our full catalog of ASIC miners, Bitaxe, and accessories. Réparation ASIC 2,500+ miners repaired. Expert diagnostics and board-level repair. Miner Database Compare 500+ miners with live profitability data.