Innosilicon A10 Pro+ ETH (750Mh)

Taux de hachage 750.0 MH/s Puissance 1,350 W Efficiency 1,800,000.0 J/TH

iPollo V1 Hyd

Taux de hachage 900.0 MH/s Puissance 800 W Efficiency 888,888.9 J/TH

Innosilicon A10 Pro+ ETH (750Mh) vs iPollo V1 Hyd

Side-by-side specs, profitability, and home mining comparison.

Specifications Comparison

Innosilicon A10 Pro+ ETH (750Mh)	Specification	iPollo V1 Hyd
750.0 MH/s	Taux de hachage	900.0 MH/s
1,350 W	Consommation électrique	800 W
1,800,000.0 J/TH	Efficiency	888,888.9 J/TH
—	Niveau de bruit	—
8,100.0 kg	Weight	8.0 kg
4,606 BTU/hr	BTU Output	2,730 BTU/hr
31/100	Home Mining Score	30/100
—	Release Year	—
EtHash	Algorithme	EtHash
Innosilicon	Manufacturer	iPollo

Profitability Comparison

Electricity Rate:

$/kWh

Innosilicon A10 Pro+ ETH (750Mh)

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$3.24

Daily Profit -$3.24

Monthly -$97.20

Yearly -$1,182.59

iPollo V1 Hyd

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$1.92

Daily Profit -$1.92

Monthly -$57.60

Yearly -$700.79

Based on BTC price of $78,241 and current network difficulty as of May 16, 2026. Actual results vary.

Verdict

Selon notre analyse multifactorielle, le iPollo V1 Hyd l'emporte sur 3 des 4 facteurs (efficacité, consommation électrique, rapport qualité-prix). Its biggest concrete edge: 51% better efficacité (1,800,000 vs 888,889 J/TH). The Innosilicon A10 Pro+ ETH (750Mh) claws back ground on score de minage domestique. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.

Winner: iPollo V1 Hyd — l'emporte sur 3 des 4 facteurs

Spec Deltas

Here is every spec where the Innosilicon A10 Pro+ ETH (750Mh) and iPollo V1 Hyd actually differ, with the gap quantified:

iPollo V1 Hyd 20% more hashrate (0.0 vs 0.0 TH/s)
iPollo V1 Hyd 41% better power draw (1,350 vs 800 W)
iPollo V1 Hyd 51% better efficacité (1,800,000 vs 888,889 J/TH)
iPollo V1 Hyd 100% better weight (8,100.0 vs 8.0 kg)
Innosilicon A10 Pro+ ETH (750Mh) 69% more heat output (4,606 vs 2,730 BTU/hr)
Innosilicon A10 Pro+ ETH (750Mh) 3% more score de minage domestique (31.0 vs 30.0)

Cost & ROI Over Time

Sticker price versus what the miner actually earns back: the table below projects cumulative net profit at a $0.10/kWh electricity rate.

Innosilicon A10 Pro+ ETH (750Mh)	Metric	iPollo V1 Hyd
$800	Upfront cost (MSRP)	$489
-$3.24	Daily net profit	-$1.92
-$1,983	Net after 1 year	-$1,190
-$3,165	Net after 2 years	-$1,891
-$4,348	Net after 3 years	-$2,591
Does not pay back at current rates (negative daily profit)	Payback period	Does not pay back at current rates (negative daily profit)

Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.

Best For...

Best for Profitability

Tie

Both miners produce similar daily profit.

Best for Home Mining

Innosilicon A10 Pro+ ETH (750Mh)

Score: 31/100. 0 dB noise level.

Best for Efficiency

iPollo V1 Hyd

888,888.9 J/TH — lower electricity cost per terahash.

Frequently Asked Questions

Is the Innosilicon A10 Pro+ ETH (750Mh) or iPollo V1 Hyd more profitable?

At the current BTC price and a $0.10/kWh electricity rate, the iPollo V1 Hyd is more profitable at $-1.92/day compared to $-3.24/day for the Innosilicon A10 Pro+ ETH (750Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.

Innosilicon A10 Pro+ ETH (750Mh) vs iPollo V1 Hyd: which runs at a lower noise level?

Both miners have similar noise levels. Check the specs table above for exact decibel readings.

For mining at home, should I pick the Innosilicon A10 Pro+ ETH (750Mh) or the iPollo V1 Hyd?

The Innosilicon A10 Pro+ ETH (750Mh) scores 31/100 on our Home Mining Score (vs 30/100 for the iPollo V1 Hyd). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.

What is the efficiency difference between Innosilicon A10 Pro+ ETH (750Mh) and iPollo V1 Hyd?

The Innosilicon A10 Pro+ ETH (750Mh) runs at 1,800,000.0 J/TH while the iPollo V1 Hyd runs at 888,888.9 J/TH — a difference of 911,111.1 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 51% better efficacité (1,800,000 vs 888,889 J/TH).

Compare Innosilicon A10 Pro+ ETH (750Mh) with...

Compare iPollo V1 Hyd with...

Shop Miners Browse our full catalog of ASIC miners, Bitaxe, and accessories. Réparation ASIC 2,500+ miners repaired. Expert diagnostics and board-level repair. Miner Database Compare 500+ miners with live profitability data.