Innosilicon A8 CryptoMaster
Bitmain Antminer X3 (220Kh)
Innosilicon A8 CryptoMaster vs Bitmain Antminer X3 (220Kh)
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A8 CryptoMaster | Specification | Bitmain Antminer X3 (220Kh) |
|---|---|---|
| 160.0 KH/s | Taux de hachage | 220.0 KH/s |
| 350 W | Consommation électrique | 465 W |
| 2,187,500,000.0 J/TH | Efficiency | 2,113,636,363.6 J/TH |
| — | Niveau de bruit | — |
| 5,990.0 kg | Weight | 5,500.0 kg |
| 1,194 BTU/hr | BTU Output | 1,587 BTU/hr |
| 34/100 | Home Mining Score | 34/100 |
| — | Release Year | — |
| Cryptonight | Algorithme | Cryptonight |
| Innosilicon | Manufacturer | Bitmain |
Profitability Comparison
Innosilicon A8 CryptoMaster
Bitmain Antminer X3 (220Kh)
Based on BTC price of $77,007 and current network difficulty as of May 18, 2026. Actual results vary.
Verdict
Our scoring model gives the nod to the Bitmain Antminer X3 (220Kh), which leads on 1 of 2 weighted factors (efficacité). Its biggest concrete edge: 38% more hashrate (0.0 vs 0.0 TH/s). The Innosilicon A8 CryptoMaster holds the edge in consommation électrique. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.
Spec Deltas
The Innosilicon A8 CryptoMaster and Bitmain Antminer X3 (220Kh) diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Bitmain Antminer X3 (220Kh) 38% more hashrate (0.0 vs 0.0 TH/s)
- Innosilicon A8 CryptoMaster 25% better power draw (350 vs 465 W)
- Bitmain Antminer X3 (220Kh) 3% better efficacité (2,187,500,000 vs 2,113,636,364 J/TH)
- Bitmain Antminer X3 (220Kh) 8% better weight (5,990 vs 5,500 kg)
- Bitmain Antminer X3 (220Kh) 33% more heat output (1,194 vs 1,587 BTU/hr)
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
TieBoth miners are equally suitable for home use.
Best for Efficiency
Bitmain Antminer X3 (220Kh)2,113,636,363.6 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Innosilicon A8 CryptoMaster or Bitmain Antminer X3 (220Kh) more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A8 CryptoMaster is more profitable at $-0.84/day compared to $-1.12/day for the Bitmain Antminer X3 (220Kh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Innosilicon A8 CryptoMaster vs Bitmain Antminer X3 (220Kh): which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Innosilicon A8 CryptoMaster or the Bitmain Antminer X3 (220Kh)?
Both miners score similarly on our Home Mining Score. Consider your specific constraints (noise tolerance, available power, heat needs) to decide.
Innosilicon A8 CryptoMaster vs Bitmain Antminer X3 (220Kh): how much does the efficiency gap matter?
The Innosilicon A8 CryptoMaster runs at 2,187,500,000.0 J/TH while the Bitmain Antminer X3 (220Kh) runs at 2,113,636,363.6 J/TH — a difference of 73,863,636.4 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 3% better efficacité (2,187,500,000 vs 2,113,636,364 J/TH).
Compare Innosilicon A8 CryptoMaster with...
- Innosilicon A8 CryptoMaster vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A8 CryptoMaster vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A8 CryptoMaster vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A8 CryptoMaster vs Innosilicon A11 Pro
- Innosilicon A8 CryptoMaster vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A8 CryptoMaster vs Innosilicon A4 Dominator