4479 Desserte Nord Autoroute 440, Laval, QC H7P 6E2

Among the pinnacle of mining hardware stands the Antminer S19 Pro, a flagship model produced by Bitmain, one of the leading manufacturers in the ASIC miner market. Renowned for its superior performance and efficiency, the Antminer S19 Pro has cemented its position as a top choice for Bitcoin miners seeking to maximize their mining potential.

The Antminer S19 Pro was introduced in the first quarter of 2020, during a period of significant anticipation in the cryptocurrency community due to the Bitcoin halving event scheduled in May 2020. This era was characterized by a rush among miners to upgrade their hardware to the most efficient miners available, to maintain profitability post-halving. The S19 Pro, with its advanced specifications, offered a timely solution for miners looking to optimize their operations in the face of reduced block rewards.

The Antminer S19 Pro boasts a hash rate of up to 110 TH/s for the 110T model, positioning it as a high-performance miner capable of tackling the complex computational challenges associated with Bitcoin mining. It is engineered for efficiency, with a power efficiency of 29.5 ± 5% J/TH, making it one of the most energy-efficient miners on the market at the time of its release. This combination of high hash rate and low power consumption makes the Antminer S19 Pro an attractive option for miners aiming to increase their mining output while minimizing operational costs.

By offering a compelling blend of efficiency and performance, the Antminer S19 Pro represents a significant milestone in the ongoing evolution of mining hardware, providing a sophisticated tool for miners in the competitive landscape of cryptocurrency mining

Key Specifications

Hash Rate

The Antminer S19 Pro is renowned for its impressive hash rate capabilities, available in two primary models: the 110 TH/s and 105 TH/s versions. The hash rate, or the speed at which the miner can perform the complex calculations necessary for blockchain transactions, is a critical factor in determining the efficiency and profitability of the mining operation. The 110 TH/s model stands out for its ability to process a higher number of transactions per second, making it particularly sought after for its enhanced mining power and potential for increased earnings.

Power Efficiency

Power efficiency is a paramount concern in cryptocurrency mining, where electricity consumption can significantly impact overall profitability. The Antminer S19 Pro addresses this with its advanced power efficiency metrics, operating at 29.5 J/TH for the 110 TH/s model at a standard temperature of 25°C. This efficiency ratio ensures that miners can achieve higher hash rates without proportionately increasing their energy costs, striking an optimal balance between operational expenditure and mining output.

Physical Dimensions

The physical dimensions of the Antminer S19 Pro are meticulously designed to accommodate the needs of sophisticated mining operations. With measurements of 370 mm in length, 195.5 mm in width, and 290 mm in height (without packaging), the device presents a compact yet powerful solution. Weighing approximately 13.2 kg, its sturdy build quality ensures durability, while its size allows for relatively easy integration into mining setups, whether in large data centers or more modest mining operations.

Operating Conditions

Optimal operating conditions are crucial for maintaining the longevity and efficiency of mining hardware. The Antminer S19 Pro is designed to operate within a temperature range of 0°C to 40°C and a humidity range of 10% to 90%, non-condensing. These specifications ensure that the miner can perform reliably in a variety of environmental conditions, provided it is kept within these parameters. Moreover, the device’s built-in cooling systems help maintain these optimal operating conditions, even under the intensive workload of continuous mining operations.

In summary, the Antminer S19 Pro stands out in the competitive field of cryptocurrency mining with its exceptional hash rate, advanced power efficiency, compact physical dimensions for easier setup and integration, and robust operating conditions that ensure durability and longevity. Its design and specifications cater to both seasoned miners and those new to the field, looking for a powerful, efficient, and reliable solution for mining Bitcoin.

Performance Enhancements with Braiins OS+

Braiins OS+ stands as a pioneering firmware designed to push the boundaries of what’s possible with mining hardware. Specifically engineered for compatibility with the Antminer S19 Pro, this software offers a suite of enhancements aimed at optimizing performance, efficiency, and operational ease. By integrating directly with the hardware, Braiins OS+ allows users to fully leverage the capabilities of their S19 Pro units, ensuring they operate at their peak potential.

Autotuning Feature

One of the standout features of Braiins OS+ is its autotuning capability. This dynamic function automatically adjusts the operating parameters of each individual chip in the mining device to maximize hash rate and power efficiency. By continuously analyzing and fine-tuning the performance of the hardware, Braiins OS+ ensures that miners get the most out of their S19 Pro units. This not only increases overall mining efficiency but can also lead to significant gains in hash rate, pushing the limits of the miner’s default capabilities.

Remote Installation

The introduction of remote installation capabilities marks a significant step forward in operational efficiency. Gone are the days of manual, on-site firmware updates that require physical access to each mining unit. With Braiins OS+, updates and installations can be executed remotely, across multiple devices simultaneously. This feature drastically reduces downtime and simplifies the management of large mining operations, allowing for updates and optimizations to be deployed swiftly and without the need for physical intervention.

Low Power Mode

In an industry where profitability is closely tied to energy consumption, Braiins OS+’s low power mode presents a vital advantage. This feature allows miners to reduce the power consumption of their S19 Pro units without a substantial loss in hash rate, significantly improving the overall energy efficiency of the mining operation. By optimizing power usage, Braiins OS+ extends the profitability margin of the Antminer S19 Pro, making it a more sustainable choice for long-term mining endeavors.

In summary, Braiins OS+ brings a suite of performance enhancements to the Antminer S19 Pro, from autotuning for increased efficiency to remote installation capabilities that streamline operational processes, and a low power mode that bolsters profitability. Together, these features make Braiins OS+ an indispensable tool for maximizing the performance and potential of the Antminer S19 Pro.

Setup and Maintenance

Setting up your Antminer S19 Pro efficiently and maintaining it properly are crucial steps to ensure its long-term reliability and performance. Here’s a comprehensive guide to get you started and keep your device running smoothly.

Initial Setup Guide

  1. Unboxing and Inspection: Carefully unbox your Antminer S19 Pro, checking for any visible damage that might have occurred during shipping. Ensure all components are present.
  2. Choosing the Right Location: Select a well-ventilated area with a stable temperature to set up your miner. The location should be dust-free and away from direct sunlight to avoid overheating.
  3. Power Supply Connection: Connect your miner to a compatible power supply unit (PSU). The Antminer S19 Pro requires a high wattage and stable power source to operate efficiently.
  4. Network Connection: Use an Ethernet cable to connect your miner to your router or switch. Ensure your internet connection is stable to prevent any disruptions in mining operations.
  5. Configuration: Access the miner’s interface through your web browser by entering the IP address of the device. You will need to configure your mining pool settings, including your wallet address, to start mining.
  6. Firmware Updates: Check for any firmware updates from Bitmain or Braiins OS+ (if using) to ensure your miner is running the latest software for optimal performance.

Maintenance and Troubleshooting Tips

By following these setup and maintenance guidelines, you can ensure your Antminer S19 Pro operates efficiently and continues to contribute to your mining operations effectively for years to come. Regular attention and care will help avoid common issues and maximize the longevity and profitability of your mining investment.

Future Prospects

The integration of innovative technologies like Bitcoin space heaters into mining operations signals a shift towards more sustainable and dual-purpose mining solutions. As the mining industry continues to evolve, the potential impact of upcoming hardware releases and software updates on the Antminer S19 Pro’s market position becomes a subject of keen interest.

Impact of Upcoming Hardware Releases

The development and adoption of Bitcoin space heaters exemplify how mining technology is branching out to serve dual purposes, not only generating cryptocurrency but also providing practical value in everyday life. This innovation highlights the potential for future hardware releases to further integrate mining activities into the fabric of daily living, potentially making mining more accessible and acceptable to a broader audience.

As new models and technologies enter the market, the Antminer S19 Pro may face increased competition. However, its established reputation for efficiency and performance could continue to hold significant value, especially if Bitmain and other manufacturers focus on enhancing existing models’ efficiency and utility, rather than merely competing on raw performance metrics.

Software Updates and Community Support

The role of software updates, particularly from platforms like Braiins OS+, in enhancing the S19 Pro’s performance cannot be overstated. Autotuning, power efficiency improvements, and remote management capabilities are just the beginning. Continuous software enhancements could further optimize mining efficiency, extend the hardware’s lifespan, and even integrate new functionalities like those seen with Bitcoin space heaters.

The Antminer S19 Pro stands at a crossroads of innovation, with emerging technologies like Bitcoin space heaters hinting at a future where mining hardware serves multiple purposes, contributing to sustainability and energy efficiency. The combined efforts of manufacturers for hardware innovation, software developers for performance optimization, and the mining community for support and creativity, will dictate the future trajectory of the Antminer S19 Pro and its place in the next generation of mining technology.


The Antminer S19 Pro has solidified its position as a cornerstone in the current mining ecosystem, representing a pinnacle of efficiency, performance, and reliability for Bitcoin miners. Its introduction was timely, addressing the need for more powerful and energy-efficient mining solutions in the face of increasing computational demands and the ever-present imperative to maximize profitability in a competitive landscape.

In summarizing the Antminer S19 Pro’s place within the mining world, it’s clear that this miner is more than just a piece of hardware; it’s a testament to the ongoing evolution of cryptocurrency mining technology. Its specifications and capabilities reflect a balance between power and efficiency, making it a preferred choice for both large-scale operations and individual enthusiasts looking to optimize their mining efforts.

For prospective buyers, the investment in an Antminer S19 Pro transcends the initial financial outlay. It’s an investment in a piece of mining technology that has been engineered to offer longevity, supported by continuous software updates and a robust community ecosystem. The operational considerations, while significant, are mitigated by the miner’s design for ease of use, maintenance, and the potential for future enhancements through software updates like those offered by Braiins OS+.

As the mining industry continues to mature, and innovations like Bitcoin space heaters begin to blur the lines between cryptocurrency mining and everyday utility, the Antminer S19 Pro stands as a beacon of what’s possible. It highlights a path forward where mining hardware not only contributes to the security and operability of blockchain networks but also to the energy efficiency and sustainability of our wider world.

In conclusion, the Antminer S19 Pro is more than just an investment in mining hardware; it’s a stake in the future of cryptocurrency mining. Its continued relevance will depend on the ability of manufacturers, software developers, and the mining community to adapt and innovate. For those considering adding the S19 Pro to their mining arsenal, it represents a judicious blend of current performance and future potential, making it a compelling choice for anyone serious about mining Bitcoin.


What is the Antminer S19 Pro?

The Antminer S19 Pro is a high-performance cryptocurrency mining hardware developed by Bitmain, renowned for its superior efficiency and hashing power, particularly designed for Bitcoin mining.

When was the Antminer S19 Pro released?

The Antminer S19 Pro was introduced in the first quarter of 2020, coinciding with the anticipation surrounding the Bitcoin halving event in May 2020.

What makes the Antminer S19 Pro distinct in terms of performance?

The Antminer S19 Pro is distinguished by its hash rate capabilities, offering models with up to 110 TH/s, along with a power efficiency of 29.5 ± 5% J/TH, making it one of the most efficient miners at the time of its release.

How does Braiins OS+ enhance the Antminer S19 Pro?

Braiins OS+ is firmware designed to optimize the performance of the Antminer S19 Pro, featuring autotuning to maximize hash rate and efficiency, remote installation capabilities, and a low power mode to improve profitability.

What are optimal operating conditions for the Antminer S19 Pro?

The Antminer S19 Pro operates best within a temperature range of 0°C to 40°C and a humidity range of 10% to 90%, non-condensing, with optimal airflow and cooling systems to maintain these conditions.

How can miners maximize the lifespan and efficiency of their Antminer S19 Pro units?

Miners can maximize their device’s lifespan by regularly updating its firmware, performing routine cleanings to remove dust and debris, monitoring the operating temperature, and replacing worn parts as necessary.

What future prospects does the Antminer S19 Pro hold amidst evolving mining technologies?

Despite new mining technologies emerging, such as Bitcoin space heaters offering dual functionalities, the Antminer S19 Pro’s efficiency, performance, and continuous software updates like those from Braiins OS+ keep it competitive and relevant in the mining landscape.