Antminer L3+ vs Elphapex DG 1+
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Antminer L3+ | Specification | Elphapex DG 1+ |
|---|---|---|
| 504.0 MH/s | Taux de hachage | 14.0 GH/s |
| 800 W | Consommation électrique | 3,920 W |
| 1,587,301.6 J/TH | Efficiency | 280,000.0 J/TH |
| 75 dB | Niveau de bruit | 75 dB |
| 5.5 kg | Weight | 18.3 kg |
| 2,730 BTU/hr | BTU Output | 13,375 BTU/hr |
| 82/100 | Home Mining Score | 30/100 |
| — | Release Year | — |
| Scrypt | Algorithme | Scrypt |
| Bitmain | Manufacturer | Elphapex |
Profitability Comparison
Antminer L3+
Elphapex DG 1+
Based on BTC price of $78,203 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Elphapex DG 1+ edges it: 2 of 4 factors go its way (efficacité, hashrate). The standout gap is 2678% more hashrate (0.0 vs 0.0 TH/s) in the Elphapex DG 1+'s favour. The Antminer L3+ holds the edge in consommation électrique and score de minage domestique. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
The Antminer L3+ and Elphapex DG 1+ diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Elphapex DG 1+ 2678% more hashrate (0.0 vs 0.0 TH/s)
- Antminer L3+ 80% better power draw (800 vs 3,920 W)
- Elphapex DG 1+ 82% better efficacité (1,587,302 vs 280,000 J/TH)
- Antminer L3+ 70% better weight (5.5 vs 18.3 kg)
- Elphapex DG 1+ 390% more heat output (2,730 vs 13,375 BTU/hr)
- Antminer L3+ 173% more score de minage domestique (82.0 vs 30.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Antminer L3+ | Metric | Elphapex DG 1+ |
|---|---|---|
| — | Upfront cost (MSRP) | $1,452 |
| -$1.92 | Daily net profit | -$9.41 |
| -$701 | Net after 1 year | -$4,885 |
| -$1,402 | Net after 2 years | -$8,319 |
| -$2,102 | Net after 3 years | -$11,753 |
| — | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Antminer L3+Score: 82/100. 75 dB noise level.
Best for Efficiency
Elphapex DG 1+280,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Antminer L3+ or Elphapex DG 1+ more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Antminer L3+ is more profitable at $-1.92/day compared to $-9.41/day for the Elphapex DG 1+. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Antminer L3+ vs Elphapex DG 1+: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Antminer L3+ or the Elphapex DG 1+?
The Antminer L3+ scores 82/100 on our Home Mining Score (vs 30/100 for the Elphapex DG 1+). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Antminer L3+ and Elphapex DG 1+ on J/TH?
The Antminer L3+ runs at 1,587,301.6 J/TH while the Elphapex DG 1+ runs at 280,000.0 J/TH — a difference of 1,307,301.6 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 82% better efficacité (1,587,302 vs 280,000 J/TH).