Plug-and-Play WiFi for Antminers: Introducing the Vonets Adapter Power Cable

For Bitcoin miners using Antminer units, setting up a reliable wireless connection can quickly become a frustrating hurdle—especially when trying to power a Vonets WiFi adapter. Many miners find themselves stuck with a simple yet annoying issue: the Vonets adapter doesn’t power on because Antminer PSUs don’t natively provide a standard DC barrel jack. This forces users into clunky workarounds, risky soldering, or external power bricks—none of which are ideal for clean or off-grid mining setups.

At D-Central Technologies, we heard you—and we’ve engineered a plug-and-play solution.

Introducing the Vonets WiFi Adapter Cable for Antminer, now available on D-Central’s website. This custom cable is designed specifically to solve the “Vonets WiFi not working with Antminer” problem by delivering seamless power through your existing 6-pin PSU connection. It’s the simplest, cleanest, and most efficient way to power both your control board and WiFi adapter from a single source—no external adapters, no mess, no headaches.

Whether you’re operating an Antminer S9, S17, S19 or custom variant, this cable transforms your setup into a smarter, tidier mining rig.

⚙️ What Is the Vonets WiFi Adapter Cable for Antminer?

The Vonets WiFi Adapter Cable for Antminer is a custom-built power solution engineered specifically for Bitcoin miners who want to integrate WiFi connectivity without the clutter or complexity of additional power supplies. This specialized cable combines a 6-pin PSU splitter with a DC barrel plug, allowing you to power both your Antminer’s control board and your Vonets WiFi adapter from a single 6-pin output on your mining PSU.

No more hacking together cables or worrying about voltage mismatches. This cable delivers exactly what’s needed—12V power via a barrel jack—using your Antminer’s existing power infrastructure.

It’s compatible with:

• All standard Bitmain control boards (e.g., S9, S17, S19, etc.)

• Most Vonets models, including VAR11N, VAP11G and VAR11N-300

• PSUs with a 6-pin PCIe-style connector (standard for Antminer rigs)

Whether you’re upgrading your garage miner, setting up off-grid, or simplifying a space heater project, this adapter cable is the missing link in your wireless setup.

️ Why This Cable Matters: Common Problems It Solves

If you’ve ever attempted to connect a Vonets WiFi adapter to your Antminer, you’ve likely run into one or more of these issues:

• No power source for the Vonets adapter
  Antminer PSUs don’t come with a standard 12V DC output, making it impossible to power your Vonets unit directly without external adapters or DIY modifications.

• Messy, inefficient workarounds
  Many miners end up using separate wall plugs, USB converters, or even cutting wires to rig a solution. This increases clutter, risk of damage, and complexity—especially in large-scale or remote setups.

• Unstable connections due to poor power
  Inconsistent or low-quality power sources can cause dropped WiFi signals, packet loss, or mining interruptions.

• Wasted space and tangled cables
  External adapters and bricks crowd your setup, creating airflow issues and a messy workspace—especially in space heater mining or stealth rigs.

The Vonets WiFi Adapter Cable for Antminer solves all of this with one clean, reliable solution:

• Powers both the Antminer control board and Vonets WiFi adapter from a single 6-pin PSU connector

• Requires no soldering, no special tools, and no additional power sources

• Keeps your mining setup minimal, efficient, and wire-free

This makes it a must-have accessory for home miners, off-grid miners, or anyone using space heater conversions like the BitChimney or Antminer Slim.

How to Use It: Plug-and-Play Simplicity

Setting up the Vonets WiFi Adapter Cable for Antminer is as simple as it gets—no tools, no guesswork, no frustration. This cable is designed to deliver seamless integration between your Antminer and Vonets WiFi adapter in just a few easy steps.

✅ Step-by-Step Setup:

1. Disconnect Power
   Always begin by powering down your Antminer and unplugging your PSU for safety.

2. Connect the 6-Pin Splitter
   Plug the included 6-pin splitter into one of your PSU’s 6-pin outputs. One side goes to the Antminer control board, just as it normally would.

3. Attach the Vonets Cable
   The other side of the splitter powers the Vonets WiFi adapter through a standard 12V DC barrel plug already attached and correctly wired for plug-and-play use.

4. Secure the Adapter
   Mount or tape the Vonets device to your rig frame or miner housing for a clean and secure install.

5. Power On & Connect
   Plug the PSU back in, power on your Antminer, and configure your Vonets adapter as usual to connect it to your WiFi network.

This setup works perfectly with:

• Vonets VAR11N, VAP11G & VAR11N-300

• Any Antminer model using a 6-pin powered control board

• Most 12V-based PSUs used in mining operations

It’s a no-brainer for home miners, stealth heaters, and off-grid deployments where simplicity and reliability are essential.

Advantages Over DIY or Other Options

When trying to power a Vonets WiFi adapter from an Antminer PSU, many miners resort to DIY hacks—splicing wires, soldering barrel jacks, or using cheap step-down converters. While these may work short-term, they introduce unnecessary risk, inefficiency, and even potential hardware damage.

The Vonets WiFi Adapter Cable for Antminer offers clear advantages that make it the superior choice:

⚡ 1. No Soldering or Wiring Required

Skip the trial-and-error of voltage matching or finding the right gauge wire. This cable is professionally made, correctly pinned, and built for immediate use—just plug it in and go.

️ 2. Safe & Reliable Power Delivery

D-Central’s cable uses high-quality connectors and 18 AWG wiring, ensuring stable 12V power to both your control board and Vonets adapter. You eliminate the risks of undervoltage, short circuits, or miswired polarity.

3. Cleaner and More Professional Setup

Avoid the spaghetti mess of added adapters, power bricks, or USB-to-barrel converters. This cable keeps your rig lean, especially in compact builds like Antminer Space Heaters, BitChimney, or stealth boxes.

4. Ideal for Home & Off-Grid Mining

In environments where access to extra power plugs is limited (like garages, tiny homes, or solar-powered rigs), this cable simplifies everything. One PSU, one splitter, two devices powered.

️ 5. Built and Tested by D-Central

Unlike off-the-shelf or Alibaba-grade hacks, this solution is proudly manufactured by D-Central Technologies, Canada’s leading Bitcoin mining hardware specialist. Trusted by miners worldwide.

Whether you’re looking for peace of mind, professional-grade quality, or just a cleaner WiFi solution for your Antminer, this cable delivers unmatched utility.

Conclusion

If you’re tired of unreliable WiFi setups or clunky power solutions for your mining rig, the Vonets WiFi Adapter Cable for Antminer is the upgrade you’ve been waiting for. Designed specifically to solve the common frustration of powering Vonets adapters with Antminer PSUs, this plug-and-play solution is clean, safe, and built to last.

With its integrated 6-pin splitter and precise 12V DC output, this cable eliminates the need for messy workarounds, making it the ideal choice for home miners, off-grid setups, and stealth mining builds like the BitChimney or Antminer Space Heater Edition.

Stop settling for half-baked DIY fixes or wasting time on unreliable adapters. Upgrade your mining rig today with the Vonets WiFi Adapter Cable, proudly designed and manufactured by D-Central Technologies in Canada.

Buy Now at D-Central and experience WiFi mining the way it was meant to be—simple, efficient, and plug-and-play.