4479 Desserte Nord Autoroute 440, Laval, QC H7P 6E2

Designed for efficiency and stability, AvalonMiner is the perfect tool to increase your Bitcoin earnings. This D-Central support article will quickly guide you through the simple setup process to get your AvalonMiner up and running.

Step-by-Step Setup Guide

Step 1: Inspect your new AvalonMiner
Upon receiving your AvalonMiner, ensure the packaging is undamaged before opening. If you notice any damage, contact our aftersales support team for assistance.

Step 2: Connect power and network
Attach the power and network cables to the appropriate ports on your AvalonMiner. Connect the network cable to a reliable switch or router (Refer to Figure 1). Ensure both the power and the network are connected to stable sources.

Step 3: Power on and boot up
Switch on your AvalonMiner and wait for a few minutes while it completes the booting process.

Step 4: Configure network and miner information
Once your AvalonMiner is running, follow these steps to configure the network and settings:

Step 5: Start mining
After configuring the network and miner information, click “Reboot” to restart your AvalonMiner and commence Bitcoin mining.

Note
If you encounter any issues during the setup process or have questions about your miner, contact the official Avalon aftersales support:

Conclusion

Setting up your AvalonMiner is a simple and straightforward process. With these steps, you’ll be on your way to mining Bitcoin in no time! As always, the D-Central support team is available to assist with any questions or concerns you might have.