4479 Desserte Nord Autoroute 440, Laval, QC H7P 6E2

To use IP Reporter to find the IP address of your new miner, follow these steps:

  1. Make sure your PC is on the same network as the miner and running a Microsoft Windows operating system. IP Reporter only works with Windows.
  2. Download IP Reporter to your computer from the provided link.
  3. Extract the downloaded file to a convenient location on your computer.
  4. Right-click on IPReporter.exe and select “Run as Administrator” to open the application.
  5. In the IP Reporter application, select the appropriate option based on your setup:
    • Shelf, Step, Position: This option is suitable for farm servers to mark the location of the servers.
    • Default: This option is suitable for home servers.
  6. Click the “Start” button to begin the IP scanning process.
  7. On the miner’s control board, press and hold the IP Report button for five seconds until you hear a beep.
  8. The miner’s IP address will appear on your computer screen within the IP Reporter application.
  9. Open a supported internet browser (Google Chrome or Firefox) on your PC.
  10. Enter the miner’s IP address in the browser’s address bar and press Enter.
  11. The miner’s interface will appear, and you can log in to access its settings.
  12. The default login credentials are username “root” and password “root”. If you have changed the password, make sure to keep it in a safe place as the miner cannot recover a lost password.

By following these steps, you can use IP Reporter to find the IP address of your miner and access its interface for configuration and management.