D-Central's Articles

Our articles talk about Bitcoin from top to bottom. We explore all general concepts and more specific concepts related to Bitcoin mining.

L3+ – L3+ hashrate is low or a hashboard is faulty

The first step to follow when your ASIC seems faulty is to do a “factory reset” of the machine. You can do this using the interface option, but it is recommended to overwrite the NAND using a MicroSD card. You can download firmware from our website download section: https://d-central.tech/downloads/firmwares/ Let

Read More »

S17 Kernel – Antminer S17 Chain 1 find 0 ASIC

If the Antminer S17 kernel log shows Chain 1 find 0 asic (as shown in the figure below), you can refer to several methods in this article for troubleshooting. 2022-05-07 08:49:17 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[l]: find 0 asic, times 0 2022-05-07 08:49:28 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[l]: find 0 asic times 1 2022-05-07 08:49:39 driver-btm-api.c:915:check_asic_number_with_power_on:

Read More »

L3+ Kernel – Antminer L3+ refresh screen failure

Refresh screen glitches are repeated by posting the same message on the same page or sending the same message on different pages. When the miner’s kernel log has a refresh screen failure, how do we troubleshoot the failure? Mar 1 14:20:39 (none) local0.err cgminer[368]: Net Err! lastest job more than

Read More »

S17 Kernel – Antminer S17 hashboard Chain 2 lacks chips

An Antminer S17 hashboard has 48 chips, but the kernel log finds 16 chips (as shown in the figure below); so, when we encounter this problem, how should we solve them? 2022-05-07 08:49:51 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 16 asic, times 0 2022-05-07 08:50:02 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 16 asic, times 1 2022-05-07 08:50:13

Read More »

S17 Kernel – Antminer S17 Pro wrong temp sensor type

The temperature sensor chip is mainly used to sense the temperature of the hash board and its surroundings. If it is damaged, it will cause abnormal temperature readings, and the hash board will not start when the temperature is too low (the kernel log shows that the temperature sensor reading failed),

Read More »

S17+ Kernel – Antminer S17+ Read temp sensor failed

According to the backstage kernel log, Antminer S17+ read the temp sensor failed, which means the temperature sensor chip is faulty. In this case, the hashboard will not start, or the miner will stop running. 2022-05-08 03:00:34 temperature.c:843:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip =

Read More »

S17+ Kernel – Antminer S17+ hashboard voltage is inconsistent

If the kernel log shows “ERROR_SOC_INIT,” it means that the Antminer S17+ hash board is mixed with inconsistent code, you can troubleshoot by following steps. 2022-03-11 08:38:21 voltage[0] = 1710 2022-03-11 08:38:21 voltage[1] = 1690 2022-03-11 08:38:21 voltage[2] = 1710 2022-03-11 08:38:21 Voltage are different. Will exit. 2022-03-11 08:38:21 driver-btm-api.c:205:set_miner_status:

Read More »

S17+ Kernel – Antminer S17+ Chain 0 only find 0 ASIC

When Antminer S17+ kernel log shows Chain 0 only finds 0 ASIC, will cause miners to stop mining, you can troubleshoot by following steps. 2021-05-04 14:22:57 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0 2021-05-04 14:23:06 driver-btm-api.c:1163:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1 2021-05-04 14:23:17 driver-btm-api.c:1164:check_asic_number_with_power_on: Chain[0]: find 0 asic, times

Read More »

Do you need help with your Bitcoin business?

We are more than a mining facility; we are your mining partners. Whether you're an amateur or a professional miner, our goal is to make your mining more profitable by offering the latest and most efficient ASIC mining solutions.