Bitmain Antminer S23 vs Whatsminer M50S++
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Bitmain Antminer S23 | Specification | Whatsminer M50S++ |
|---|---|---|
| 318.0 TH/s | Taux de hachage | 160.0 TH/s |
| 3,498 W | Consommation électrique | 3,520 W |
| 11.0 J/TH | Efficiency | 22.0 J/TH |
| 75 dB | Niveau de bruit | 75 dB |
| 14.5 kg | Weight | 13.5 kg |
| 11,935 BTU/hr | BTU Output | 12,010 BTU/hr |
| 36/100 | Home Mining Score | 30/100 |
| — | Release Year | — |
| SHA-256 | Algorithme | SHA-256 |
| Bitmain | Manufacturer | MicroBT |
Profitability Comparison
Bitmain Antminer S23
Whatsminer M50S++
Based on BTC price of $76,880 and current network difficulty as of May 18, 2026. Actual results vary.
Verdict
Weighing six performance factors, the Bitmain Antminer S23 comes out ahead — it takes 5 of 5 (efficacité, hashrate, consommation électrique, score de minage domestique, rapport qualité-prix). Its biggest concrete edge: 50% better efficacité (11.0 vs 22.0 J/TH). Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Here is every spec where the Bitmain Antminer S23 and Whatsminer M50S++ actually differ, with the gap quantified:
- Bitmain Antminer S23 99% more hashrate (318 vs 160 TH/s)
- Bitmain Antminer S23 1% better power draw (3,498 vs 3,520 W)
- Bitmain Antminer S23 50% better efficacité (11.0 vs 22.0 J/TH)
- Whatsminer M50S++ 7% better weight (14.5 vs 13.5 kg)
- Whatsminer M50S++ 1% more heat output (11,935 vs 12,010 BTU/hr)
- Bitmain Antminer S23 20% more score de minage domestique (36.0 vs 30.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Bitmain Antminer S23 | Metric | Whatsminer M50S++ |
|---|---|---|
| $4,999 | Upfront cost (MSRP) | $4,000 |
| $2.86 | Daily net profit | -$2.79 |
| -$3,957 | Net after 1 year | -$5,017 |
| -$2,915 | Net after 2 years | -$6,035 |
| -$1,872 | Net after 3 years | -$7,052 |
| Takes ~4.8 years to pay back at current rates | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
Bitmain Antminer S23$5.64/day higher profit at current rates.
Best for Home Mining
Bitmain Antminer S23Score: 36/100. 75 dB noise level.
Best for Efficiency
Bitmain Antminer S2311.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Bitmain Antminer S23 or Whatsminer M50S++ more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Bitmain Antminer S23 is more profitable at $2.86/day compared to $-2.79/day for the Whatsminer M50S++. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Is the Bitmain Antminer S23 or the Whatsminer M50S++ better for noise-sensitive spaces?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Bitmain Antminer S23 vs Whatsminer M50S++: which fits a residential setup better?
The Bitmain Antminer S23 scores 36/100 on our Home Mining Score (vs 30/100 for the Whatsminer M50S++). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Bitmain Antminer S23 vs Whatsminer M50S++: how much does the efficiency gap matter?
The Bitmain Antminer S23 runs at 11.0 J/TH while the Whatsminer M50S++ runs at 22.0 J/TH — a difference of 11.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 50% better efficacité (11.0 vs 22.0 J/TH).