Whatsminer M56S vs MicroBT WhatsMiner M72
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Whatsminer M56S | Specification | MicroBT WhatsMiner M72 |
|---|---|---|
| 212.0 TH/s | Taux de hachage | 262.0 TH/s |
| 5,550 W | Consommation électrique | 3,799 W |
| 26.2 J/TH | Efficiency | 14.5 J/TH |
| 50 dB | Niveau de bruit | 75 dB |
| 13.0 kg | Weight | 25.5 kg |
| 18,937 BTU/hr | BTU Output | 12,962 BTU/hr |
| 44/100 | Home Mining Score | 30/100 |
| — | Release Year | — |
| SHA-256 | Algorithme | SHA-256 |
| MicroBT | Manufacturer | MicroBT |
Profitability Comparison
Whatsminer M56S
MicroBT WhatsMiner M72
Based on BTC price of $78,183 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the MicroBT WhatsMiner M72 edges it: 3 of 5 factors go its way (efficacité, hashrate, consommation électrique). The standout gap is 45% better efficacité (26.2 vs 14.5 J/TH) in the MicroBT WhatsMiner M72's favour. The Whatsminer M56S claws back ground on score de minage domestique and niveau sonore. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Stripped to the numbers, this is how far apart the Whatsminer M56S and MicroBT WhatsMiner M72 sit on each measurable spec:
- MicroBT WhatsMiner M72 24% more hashrate (212 vs 262 TH/s)
- MicroBT WhatsMiner M72 32% better power draw (5,550 vs 3,799 W)
- MicroBT WhatsMiner M72 45% better efficacité (26.2 vs 14.5 J/TH)
- Whatsminer M56S 33% better noise (50.0 vs 75.0 dB)
- Whatsminer M56S 49% better weight (13.0 vs 25.5 kg)
- Whatsminer M56S 46% more heat output (18,937 vs 12,962 BTU/hr)
- Whatsminer M56S 47% more score de minage domestique (44.0 vs 30.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Whatsminer M56S | Metric | MicroBT WhatsMiner M72 |
|---|---|---|
| $5,500 | Upfront cost (MSRP) | — |
| -$5.69 | Daily net profit | $0.31 |
| -$7,578 | Net after 1 year | +$113 |
| -$9,656 | Net after 2 years | +$225 |
| -$11,733 | Net after 3 years | +$338 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
MicroBT WhatsMiner M72$6.00/day higher profit at current rates.
Best for Home Mining
Whatsminer M56SScore: 44/100. 50 dB noise level.
Best for Efficiency
MicroBT WhatsMiner M7214.5 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Whatsminer M56S vs MicroBT WhatsMiner M72: which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the MicroBT WhatsMiner M72 is more profitable at $0.31/day compared to $-5.69/day for the Whatsminer M56S. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Whatsminer M56S vs MicroBT WhatsMiner M72: which runs at a lower noise level?
The Whatsminer M56S is quieter at 50 dB compared to the MicroBT WhatsMiner M72 at 75 dB. For home mining, lower noise levels make a significant difference in livability.
Whatsminer M56S vs MicroBT WhatsMiner M72: which fits a residential setup better?
The Whatsminer M56S scores 44/100 on our Home Mining Score (vs 30/100 for the MicroBT WhatsMiner M72). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Whatsminer M56S vs MicroBT WhatsMiner M72: how much does the efficiency gap matter?
The Whatsminer M56S runs at 26.2 J/TH while the MicroBT WhatsMiner M72 runs at 14.5 J/TH — a difference of 11.7 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 45% better efficacité (26.2 vs 14.5 J/TH).