Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon T3 50T
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A11 Pro ETH (1500Mh) | Specification | Innosilicon T3 50T |
|---|---|---|
| 1.5 GH/s | Hashrate | 50.0 TH/s |
| 2,350 W | Power Consumption | 3,100 W |
| 1,566,666.7 J/TH | Efficiency | 62.0 J/TH |
| — | Noise Level | — |
| — | Weight | 10,000.0 kg |
| 8,018 BTU/hr | BTU Output | 10,577 BTU/hr |
| 26/100 | Home Mining Score | 22/100 |
| — | Release Year | — |
| EtHash | Algorithm | SHA-256 |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A11 Pro ETH (1500Mh)
Innosilicon T3 50T
Based on BTC price of $79,248 and current network difficulty as of May 15, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Innosilicon T3 50T edges it: 2 of 4 factors go its way (efficiency, hashrate). Where it pulls away hardest is 3333233% more hashrate (0.0 vs 50.0 TH/s). The Innosilicon A11 Pro ETH (1500Mh) claws back ground on power consumption and home mining score. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
The Innosilicon A11 Pro ETH (1500Mh) and Innosilicon T3 50T diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Innosilicon T3 50T 3333233% more hashrate (0.0 vs 50.0 TH/s)
- Innosilicon A11 Pro ETH (1500Mh) 24% better power draw (2,350 vs 3,100 W)
- Innosilicon T3 50T 100% better efficiency (1,566,666.7 vs 62.0 J/TH)
- Innosilicon T3 50T 32% more heat output (8,018 vs 10,577 BTU/hr)
- Innosilicon A11 Pro ETH (1500Mh) 18% more home mining score (26.0 vs 22.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A11 Pro ETH (1500Mh) | Metric | Innosilicon T3 50T |
|---|---|---|
| $1,200 | Upfront cost (MSRP) | — |
| -$5.64 | Daily net profit | -$5.56 |
| -$3,259 | Net after 1 year | -$2,029 |
| -$5,317 | Net after 2 years | -$4,059 |
| -$7,376 | Net after 3 years | -$6,088 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A11 Pro ETH (1500Mh)Score: 26/100. 0 dB noise level.
Best for Efficiency
Innosilicon T3 50T62.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon T3 50T: which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon T3 50T is more profitable at $-5.56/day compared to $-5.64/day for the Innosilicon A11 Pro ETH (1500Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon T3 50T: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Which is better for home mining, the Innosilicon A11 Pro ETH (1500Mh) or Innosilicon T3 50T?
The Innosilicon A11 Pro ETH (1500Mh) scores 26/100 on our Home Mining Score (vs 22/100 for the Innosilicon T3 50T). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Innosilicon A11 Pro ETH (1500Mh) and Innosilicon T3 50T on J/TH?
The Innosilicon A11 Pro ETH (1500Mh) runs at 1,566,666.7 J/TH while the Innosilicon T3 50T runs at 62.0 J/TH — a difference of 1,566,604.7 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficiency (1,566,666.7 vs 62.0 J/TH).
Compare Innosilicon A11 Pro ETH (1500Mh) with...
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A11 Pro
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A4 Dominator
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A4+ LTCMaster