Innosilicon A10 ETHMaster (500Mh) vs Innosilicon T3 50T
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 ETHMaster (500Mh) | Specification | Innosilicon T3 50T |
|---|---|---|
| 500.0 MH/s | Hashrate | 50.0 TH/s |
| 750 W | Power Consumption | 3,100 W |
| 1,500,000.0 J/TH | Efficiency | 62.0 J/TH |
| — | Noise Level | — |
| 8,100.0 kg | Weight | 10,000.0 kg |
| 2,559 BTU/hr | BTU Output | 10,577 BTU/hr |
| 30/100 | Home Mining Score | 22/100 |
| — | Release Year | — |
| Etchash | Algorithm | SHA-256 |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 ETHMaster (500Mh)
Innosilicon T3 50T
Based on BTC price of $79,227 and current network difficulty as of May 15, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the Innosilicon T3 50T wins on 2 of 4 factors (efficiency, hashrate). Where it pulls away hardest is 9999900% more hashrate (0.0 vs 50.0 TH/s). The Innosilicon A10 ETHMaster (500Mh) claws back ground on power consumption and home mining score. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
The Innosilicon A10 ETHMaster (500Mh) and Innosilicon T3 50T diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Innosilicon T3 50T 9999900% more hashrate (0.0 vs 50.0 TH/s)
- Innosilicon A10 ETHMaster (500Mh) 76% better power draw (750 vs 3,100 W)
- Innosilicon T3 50T 100% better efficiency (1,500,000.0 vs 62.0 J/TH)
- Innosilicon A10 ETHMaster (500Mh) 19% better weight (8,100 vs 10,000 kg)
- Innosilicon T3 50T 313% more heat output (2,559 vs 10,577 BTU/hr)
- Innosilicon A10 ETHMaster (500Mh) 36% more home mining score (30.0 vs 22.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A10 ETHMaster (500Mh) | Metric | Innosilicon T3 50T |
|---|---|---|
| $2,150 | Upfront cost (MSRP) | — |
| -$1.80 | Daily net profit | -$5.56 |
| -$2,807 | Net after 1 year | -$2,029 |
| -$3,464 | Net after 2 years | -$4,059 |
| -$4,121 | Net after 3 years | -$6,088 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A10 ETHMaster (500Mh)Score: 30/100. 0 dB noise level.
Best for Efficiency
Innosilicon T3 50T62.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Innosilicon A10 ETHMaster (500Mh) or the Innosilicon T3 50T?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 ETHMaster (500Mh) is more profitable at $-1.80/day compared to $-5.56/day for the Innosilicon T3 50T. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Innosilicon A10 ETHMaster (500Mh) or Innosilicon T3 50T?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Which is better for home mining, the Innosilicon A10 ETHMaster (500Mh) or Innosilicon T3 50T?
The Innosilicon A10 ETHMaster (500Mh) scores 30/100 on our Home Mining Score (vs 22/100 for the Innosilicon T3 50T). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Innosilicon A10 ETHMaster (500Mh) and Innosilicon T3 50T on J/TH?
The Innosilicon A10 ETHMaster (500Mh) runs at 1,500,000.0 J/TH while the Innosilicon T3 50T runs at 62.0 J/TH — a difference of 1,499,938.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficiency (1,500,000.0 vs 62.0 J/TH).
Compare Innosilicon A10 ETHMaster (500Mh) with...
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A11 Pro
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A4+ LTCMaster