Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro ETH (500Mh)
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 ETHMaster (500Mh) | Specification | Innosilicon A10 Pro ETH (500Mh) |
|---|---|---|
| 500.0 MH/s | Hashrate | 500.0 MH/s |
| 750 W | Power Consumption | 960 W |
| 1,500,000.0 J/TH | Efficiency | 1,920,000.0 J/TH |
| — | Noise Level | — |
| 8,100.0 kg | Weight | 8,100.0 kg |
| 2,559 BTU/hr | BTU Output | 3,276 BTU/hr |
| 30/100 | Home Mining Score | 31/100 |
| — | Release Year | — |
| Etchash | Algorithm | EtHash |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 ETHMaster (500Mh)
Innosilicon A10 Pro ETH (500Mh)
Based on BTC price of $78,208 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Innosilicon A10 ETHMaster (500Mh) edges it: 2 of 4 factors go its way (efficiency, power consumption). The standout gap is 22% better efficiency (1,500,000 vs 1,920,000 J/TH) in the Innosilicon A10 ETHMaster (500Mh)'s favour. The Innosilicon A10 Pro ETH (500Mh) holds the edge in home mining score and price-performance. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Here is every spec where the Innosilicon A10 ETHMaster (500Mh) and Innosilicon A10 Pro ETH (500Mh) actually differ, with the gap quantified:
- Innosilicon A10 ETHMaster (500Mh) 22% better power draw (750 vs 960 W)
- Innosilicon A10 ETHMaster (500Mh) 22% better efficiency (1,500,000 vs 1,920,000 J/TH)
- Innosilicon A10 Pro ETH (500Mh) 28% more heat output (2,559 vs 3,276 BTU/hr)
- Innosilicon A10 Pro ETH (500Mh) 3% more home mining score (30.0 vs 31.0)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Innosilicon A10 ETHMaster (500Mh) | Metric | Innosilicon A10 Pro ETH (500Mh) |
|---|---|---|
| $2,150 | Upfront cost (MSRP) | $469 |
| -$1.80 | Daily net profit | -$2.30 |
| -$2,807 | Net after 1 year | -$1,310 |
| -$3,464 | Net after 2 years | -$2,151 |
| -$4,121 | Net after 3 years | -$2,992 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A10 Pro ETH (500Mh)Score: 31/100. 0 dB noise level.
Best for Efficiency
Innosilicon A10 ETHMaster (500Mh)1,500,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro ETH (500Mh): which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 ETHMaster (500Mh) is more profitable at $-1.80/day compared to $-2.30/day for the Innosilicon A10 Pro ETH (500Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Innosilicon A10 ETHMaster (500Mh) or Innosilicon A10 Pro ETH (500Mh)?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Which is better for home mining, the Innosilicon A10 ETHMaster (500Mh) or Innosilicon A10 Pro ETH (500Mh)?
The Innosilicon A10 Pro ETH (500Mh) scores 31/100 on our Home Mining Score (vs 30/100 for the Innosilicon A10 ETHMaster (500Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro ETH (500Mh): how much does the efficiency gap matter?
The Innosilicon A10 ETHMaster (500Mh) runs at 1,500,000.0 J/TH while the Innosilicon A10 Pro ETH (500Mh) runs at 1,920,000.0 J/TH — a difference of 420,000.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 22% better efficiency (1,500,000 vs 1,920,000 J/TH).
Compare Innosilicon A10 ETHMaster (500Mh) with...
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A11 Pro
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A4+ LTCMaster
Compare Innosilicon A10 Pro ETH (500Mh) with...
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A11 Pro
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A4+ LTCMaster