Innosilicon A10 Pro ETH (500Mh)

Hashrate 500.0 MH/s Power 960 W Efficiency 1,920,000.0 J/TH

Innosilicon A10 Pro+ ETH (750Mh)

Hashrate 750.0 MH/s Power 1,350 W Efficiency 1,800,000.0 J/TH

Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)

Side-by-side specs, profitability, and home mining comparison.

Specifications Comparison

Innosilicon A10 Pro ETH (500Mh)	Specification	Innosilicon A10 Pro+ ETH (750Mh)
500.0 MH/s	Hashrate	750.0 MH/s
960 W	Power Consumption	1,350 W
1,920,000.0 J/TH	Efficiency	1,800,000.0 J/TH
—	Noise Level	—
8,100.0 kg	Weight	8,100.0 kg
3,276 BTU/hr	BTU Output	4,606 BTU/hr
31/100	Home Mining Score	31/100
—	Release Year	—
EtHash	Algorithm	EtHash
Innosilicon	Manufacturer	Innosilicon

Profitability Comparison

Electricity Rate:

$/kWh

Innosilicon A10 Pro ETH (500Mh)

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$2.30

Daily Profit -$2.30

Monthly -$69.12

Yearly -$840.95

Innosilicon A10 Pro+ ETH (750Mh)

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$3.24

Daily Profit -$3.24

Monthly -$97.20

Yearly -$1,182.59

Based on BTC price of $78,208 and current network difficulty as of May 16, 2026. Actual results vary.

Verdict

Weighing six performance factors, the Innosilicon A10 Pro+ ETH (750Mh) comes out ahead — it takes 1 of 3 (efficiency). Its biggest concrete edge: 50% more hashrate (0.0 vs 0.0 TH/s). The Innosilicon A10 Pro ETH (500Mh) holds the edge in power consumption and price-performance. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.

Winner: Innosilicon A10 Pro+ ETH (750Mh) — wins on 2 of 3 factors

Spec Deltas

Stripped to the numbers, this is how far apart the Innosilicon A10 Pro ETH (500Mh) and Innosilicon A10 Pro+ ETH (750Mh) sit on each measurable spec:

Innosilicon A10 Pro+ ETH (750Mh) 50% more hashrate (0.0 vs 0.0 TH/s)
Innosilicon A10 Pro ETH (500Mh) 29% better power draw (960 vs 1,350 W)
Innosilicon A10 Pro+ ETH (750Mh) 6% better efficiency (1,920,000 vs 1,800,000 J/TH)
Innosilicon A10 Pro+ ETH (750Mh) 41% more heat output (3,276 vs 4,606 BTU/hr)

Cost & ROI Over Time

Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.

Innosilicon A10 Pro ETH (500Mh)	Metric	Innosilicon A10 Pro+ ETH (750Mh)
$469	Upfront cost (MSRP)	$800
-$2.30	Daily net profit	-$3.24
-$1,310	Net after 1 year	-$1,983
-$2,151	Net after 2 years	-$3,165
-$2,992	Net after 3 years	-$4,348
Does not pay back at current rates (negative daily profit)	Payback period	Does not pay back at current rates (negative daily profit)

Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.

Best For...

Best for Profitability

Tie

Both miners produce similar daily profit.

Best for Home Mining

Tie

Both miners are equally suitable for home use.

Best for Efficiency

Innosilicon A10 Pro+ ETH (750Mh)

1,800,000.0 J/TH — lower electricity cost per terahash.

Frequently Asked Questions

Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh): which one earns more per day?

At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro ETH (500Mh) is more profitable at $-2.30/day compared to $-3.24/day for the Innosilicon A10 Pro+ ETH (750Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.

Which is quieter, the Innosilicon A10 Pro ETH (500Mh) or Innosilicon A10 Pro+ ETH (750Mh)?

Both miners have similar noise levels. Check the specs table above for exact decibel readings.

Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh): which fits a residential setup better?

Both miners score similarly on our Home Mining Score. Consider your specific constraints (noise tolerance, available power, heat needs) to decide.

Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh): how much does the efficiency gap matter?

The Innosilicon A10 Pro ETH (500Mh) runs at 1,920,000.0 J/TH while the Innosilicon A10 Pro+ ETH (750Mh) runs at 1,800,000.0 J/TH — a difference of 120,000.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 6% better efficiency (1,920,000 vs 1,800,000 J/TH).

Compare Innosilicon A10 Pro ETH (500Mh) with...

Compare Innosilicon A10 Pro+ ETH (750Mh) with...

Shop Miners Browse our full catalog of ASIC miners, Bitaxe, and accessories. ASIC Repair 2,500+ miners repaired. Expert diagnostics and board-level repair. Miner Database Compare 500+ miners with live profitability data.