Innosilicon A10 Pro ETH (500Mh)
Heater-Class Miner
At 960W, this miner outputs approximately 3276 BTU/hr of heat — equivalent to a standard electric space heater. Every watt consumed by an ASIC miner is converted to heat with 100% efficiency, making it a space heater that also mines Bitcoin.
During heating season, miner heat can offset part of the heat a room would otherwise need from another electric heater. The economics depend on your electricity rate, room heat demand, BTC price, network difficulty, and noise constraints.
Profitability Calculator
| Period | Revenue | Electricity Cost | Profit |
|---|---|---|---|
| Daily | $0.00 | $1.61 | $-1.61 |
| Weekly | $0.00 | $11.29 | $-11.29 |
| Monthly | $0.00 | $48.38 | $-48.38 |
| Yearly | $0.01 | $588.67 | $-588.67 |
Heating offset estimates the value of heat replacing an electric space heater during heating season (~6 months/year in Canada). Actual savings depend on your heating setup and climate.
Where to Buy the Innosilicon A10 Pro ETH (500Mh)
D-Central Technologies is a Bitcoin-only company. For this miner, check out our trusted partner retailers below.
ASIC Miner Market
United StatesWide selection of new and used ASIC miners. US-based shipping.
Shop NowPartner links may earn D-Central a commission at no extra cost to you. Have you considered Bitcoin mining instead? Explore Bitcoin miners →
Full Specifications
| Model | Innosilicon A10 Pro ETH (500Mh) |
| Model Number | A10 Pro ETH (500Mh) |
| Manufacturer | Innosilicon |
| Algorithm | EtHash |
| Coins Mined | Ethereum Classic (ETC) |
| Hashrate | 500 MH/s |
| Power Consumption | 960 W |
| Efficiency | 1920000 J/TH |
| Dimensions | 136 x 285 x 362mm |
| Weight | 8.1 |
| BTU Output | 3276 BTU/hr |
| Equivalent Heater | Half a standard space heater (3,276 BTU/hr) |
| Daily Power Cost | $1.61/day |
| Monthly Power Cost | $48.38/mo |
| Circuit Requirement | Standard 120V 15A |
| Release Date | 2020-05-01 |
| MSRP | $469.00 |
| Status | Active |
Home Mining Assessment
The Innosilicon A10 Pro ETH (500Mh) is a EtHash cryptocurrency miner manufactured by Innosilicon. It delivers a hashrate of 500 MH/s with a power consumption of 960W, achieving an efficiency of 1920000 J/TH.
Weighs 8100 kg, measures 136 x 285 x 362mm.
With a home mining score of 31/100, this miner is best suited for dedicated mining spaces for residential use. It produces 3276 BTU/h of heat output, making it suitable for supplemental space heating.
At 1920000 J/TH, the Innosilicon A10 Pro ETH (500Mh) sits in the legacy efficiency tier, so it is most economical run as a space heater or for hobby and learning setups rather than for pure profit.
Its waste heat (around 3276 BTU/h) can be ducted into a room, turning money you would otherwise spend on heating into hashrate.
View detailed specifications, real-time profitability calculations, and comparison data for the Innosilicon A10 Pro ETH (500Mh) in our comprehensive ASIC miner database.
Related Miners
iPollo V1 Mini Wifi 260
iPollo V1
Innosilicon A10 Pro+ ETH (750Mh)
iPollo X1
Compare the Innosilicon A10 Pro ETH (500Mh)
Frequently Asked Questions
What are the current mining economics for the Innosilicon A10 Pro ETH (500Mh)?
At $0.07/kWh, the Innosilicon A10 Pro ETH (500Mh) currently shows an estimated daily net cost of $1.61 before pool fees and hardware cost. Lower electricity rates, network changes, BTC price changes, or useful heat recovery can change the result.
Can I mine Bitcoin at home with the Innosilicon A10 Pro ETH (500Mh)?
The Innosilicon A10 Pro ETH (500Mh) has a home mining score of 31/100. With 0 dB noise and 960W power draw, it may require a dedicated space like a garage, basement, or outdoor enclosure. Consider noise insulation and proper ventilation.
Can the Innosilicon A10 Pro ETH (500Mh) heat my home?
The Innosilicon A10 Pro ETH (500Mh) outputs approximately 3276 BTU/hr of heat. For reference, a typical space heater produces 5,000-5,500 BTU/hr. All electrical energy consumed by the miner is converted to heat, making it 100% efficient as a heater. D-Central offers Bitcoin Space Heater builds designed specifically for home heating integration.
What power supply does the Innosilicon A10 Pro ETH (500Mh) need?
The Innosilicon A10 Pro ETH (500Mh) draws 960W of power. You need a power supply rated for at least 1,056W with appropriate voltage (200-240V AC). D-Central stocks compatible power supplies in our shop. Always use a quality PSU from a reputable manufacturer to protect the miner and wiring.