Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4 Dominator
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 Pro+ ETH (750Mh) | Specification | Innosilicon A4 Dominator |
|---|---|---|
| 750.0 MH/s | Hashrate | 280.0 MH/s |
| 1,350 W | Power Consumption | 1,050 W |
| 1,800,000.0 J/TH | Efficiency | 3,750,000.0 J/TH |
| — | Noise Level | — |
| 8,100.0 kg | Weight | 9,200.0 kg |
| 4,606 BTU/hr | BTU Output | 3,583 BTU/hr |
| 31/100 | Home Mining Score | 31/100 |
| — | Release Year | — |
| EtHash | Algorithm | Scrypt |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 Pro+ ETH (750Mh)
Innosilicon A4 Dominator
Based on BTC price of $78,208 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the Innosilicon A10 Pro+ ETH (750Mh) wins on 1 of 2 factors (efficiency). Its biggest concrete edge: 168% more hashrate (0.0 vs 0.0 TH/s). The Innosilicon A4 Dominator holds the edge in power consumption. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
The Innosilicon A10 Pro+ ETH (750Mh) and Innosilicon A4 Dominator diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Innosilicon A10 Pro+ ETH (750Mh) 168% more hashrate (0.0 vs 0.0 TH/s)
- Innosilicon A4 Dominator 22% better power draw (1,350 vs 1,050 W)
- Innosilicon A10 Pro+ ETH (750Mh) 52% better efficiency (1,800,000 vs 3,750,000 J/TH)
- Innosilicon A10 Pro+ ETH (750Mh) 12% better weight (8,100 vs 9,200 kg)
- Innosilicon A10 Pro+ ETH (750Mh) 29% more heat output (4,606 vs 3,583 BTU/hr)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Innosilicon A10 Pro+ ETH (750Mh) | Metric | Innosilicon A4 Dominator |
|---|---|---|
| $800 | Upfront cost (MSRP) | — |
| -$3.24 | Daily net profit | -$2.52 |
| -$1,983 | Net after 1 year | -$920 |
| -$3,165 | Net after 2 years | -$1,840 |
| -$4,348 | Net after 3 years | -$2,759 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
TieBoth miners are equally suitable for home use.
Best for Efficiency
Innosilicon A10 Pro+ ETH (750Mh)1,800,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Innosilicon A10 Pro+ ETH (750Mh) or the Innosilicon A4 Dominator?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A4 Dominator is more profitable at $-2.52/day compared to $-3.24/day for the Innosilicon A10 Pro+ ETH (750Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4 Dominator: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4 Dominator: which fits a residential setup better?
Both miners score similarly on our Home Mining Score. Consider your specific constraints (noise tolerance, available power, heat needs) to decide.
What is the efficiency difference between Innosilicon A10 Pro+ ETH (750Mh) and Innosilicon A4 Dominator?
The Innosilicon A10 Pro+ ETH (750Mh) runs at 1,800,000.0 J/TH while the Innosilicon A4 Dominator runs at 3,750,000.0 J/TH — a difference of 1,950,000.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 52% better efficiency (1,800,000 vs 3,750,000 J/TH).
Compare Innosilicon A10 Pro+ ETH (750Mh) with...
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4+ LTCMaster