VOLCMINER D1 (16.2Gh) vs VOLCMINER D3
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| VOLCMINER D1 (16.2Gh) | Specification | VOLCMINER D3 |
|---|---|---|
| 16.2 GH/s | Hashrate | 20.0 GH/s |
| 3,700 W | Power Consumption | 3,580 W |
| 228,395.1 J/TH | Efficiency | 179,000.0 J/TH |
| 75 dB | Noise Level | 75 dB |
| 15.6 kg | Weight | 22.0 kg |
| 12,624 BTU/hr | BTU Output | 12,215 BTU/hr |
| 30/100 | Home Mining Score | 30/100 |
| — | Release Year | — |
| Scrypt | Algorithm | Scrypt |
| VOLCMINER | Manufacturer | VOLCMINER |
Profitability Comparison
VOLCMINER D1 (16.2Gh)
VOLCMINER D3
Based on BTC price of $78,217 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Weighing six performance factors, the VOLCMINER D3 comes out ahead — it takes 3 of 3 (efficiency, hashrate, power consumption). The standout gap is 22% better efficiency (228,395 vs 179,000 J/TH) in the VOLCMINER D3's favour. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
The VOLCMINER D1 (16.2Gh) and VOLCMINER D3 diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- VOLCMINER D3 23% more hashrate (0.0 vs 0.0 TH/s)
- VOLCMINER D3 3% better power draw (3,700 vs 3,580 W)
- VOLCMINER D3 22% better efficiency (228,395 vs 179,000 J/TH)
- VOLCMINER D1 (16.2Gh) 29% better weight (15.6 vs 22.0 kg)
- VOLCMINER D1 (16.2Gh) 3% more heat output (12,624 vs 12,215 BTU/hr)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| VOLCMINER D1 (16.2Gh) | Metric | VOLCMINER D3 |
|---|---|---|
| — | Upfront cost (MSRP) | $5,990 |
| -$8.88 | Daily net profit | -$8.59 |
| -$3,241 | Net after 1 year | -$9,126 |
| -$6,482 | Net after 2 years | -$12,262 |
| -$9,723 | Net after 3 years | -$15,397 |
| — | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
TieBoth miners are equally suitable for home use.
Best for Efficiency
VOLCMINER D3179,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the VOLCMINER D1 (16.2Gh) or VOLCMINER D3 more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the VOLCMINER D3 is more profitable at $-8.59/day compared to $-8.88/day for the VOLCMINER D1 (16.2Gh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
VOLCMINER D1 (16.2Gh) vs VOLCMINER D3: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the VOLCMINER D1 (16.2Gh) or the VOLCMINER D3?
Both miners score similarly on our Home Mining Score. Consider your specific constraints (noise tolerance, available power, heat needs) to decide.
VOLCMINER D1 (16.2Gh) vs VOLCMINER D3: how much does the efficiency gap matter?
The VOLCMINER D1 (16.2Gh) runs at 228,395.1 J/TH while the VOLCMINER D3 runs at 179,000.0 J/TH — a difference of 49,395.1 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 22% better efficiency (228,395 vs 179,000 J/TH).