4479 Desserte Nord Autoroute 440, Laval, QC H7P 6E2

Follow the steps below to upgrade your S19a Pro Mining Machine:

Step 1: Preparation

Hardware Needed:

  1. Computer (Windows Operating System)
  2. Miner (or control board)
  3. Router

Software Needed:

  1. Latest firmware from official website
  2. IPReporter Tool
  3. Google Chrome browser (or Firefox browser)

Step 2: Logging into the Miner Background

  1. Connect the computer and miner (or control board) to the router (set as DHCP service). Ensure both are connected to the same network segment.
  2. Open the IPReporter tool and click ‘Start’.
  3. Press the IP Report button on the miner or control board. Wait for 0.5 seconds. The indicator on the miner will flash red and green light 5 times quickly, indicating successful IP feedback to the network.
  4. The IPReporter software will display the miner’s IP address and MAC address. Note down the IP address.
  5. Open your web browser and enter the IP address into the address bar.
  6. You will be prompted to enter your username and password. The default for both is ‘root’. If they were changed previously, use the updated information to log in.

Step 3: Miner Upgrade

  1. In the miner’s background interface, navigate to the ‘System’ dropdown menu. The firmware upgrade option is hidden here. Click on ‘Firmware Upgrade’.
  2. Click the ‘Upload’ button in the firmware upgrade page. This will open the file selection window. Navigate to the location where you saved the latest firmware and select the respective firmware. Click ‘Open’.
  3. Verify the correct firmware name is displayed in the firmware files window bar and then click ‘Upgrade Firmware’.
  4. The system will display a message indicating the firmware is being upgraded. Wait for the process to complete. The miner will automatically restart – this process can take around 1 minute.
  5. After the firmware upgrade is successful, the miner will refresh the page. This means the upgrade process is complete.
  6. To confirm the upgrade was successful, check the miner’s firmware version. If it matches the version of the firmware you uploaded, the upgrade was successful.

If you encounter any issues during the upgrade process, feel free to contact us for assistance.