Bitmain Antminer S23 Immersion (442Th)
Antminer D9 vs Bitmain Antminer S23 Immersion (442Th)
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Antminer D9 | Specification | Bitmain Antminer S23 Immersion (442Th) |
|---|---|---|
| 1,770.0 GH/s | Taux de hachage | 442.0 TH/s |
| 2,839 W | Consommation électrique | 5,304 W |
| 1,604.0 J/TH | Efficiency | 12.0 J/TH |
| 75 dB | Niveau de bruit | 50 dB |
| 16.1 kg | Weight | 17.2 kg |
| 9,687 BTU/hr | BTU Output | 18,097 BTU/hr |
| 36/100 | Home Mining Score | 44/100 |
| — | Release Year | — |
| X11 | Algorithme | SHA-256 |
| Bitmain | Manufacturer | Bitmain |
Profitability Comparison
Antminer D9
Bitmain Antminer S23 Immersion (442Th)
Based on BTC price of $78,232 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Bitmain Antminer S23 Immersion (442Th) edges it: 5 of 6 factors go its way (efficacité, hashrate, score de minage domestique, niveau sonore, rapport qualité-prix). The standout gap is 24872% more hashrate (1.8 vs 442.0 TH/s) in the Bitmain Antminer S23 Immersion (442Th)'s favour. That said, the Antminer D9 isn't beaten everywhere — it still wins consommation électrique. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
The Antminer D9 and Bitmain Antminer S23 Immersion (442Th) diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Bitmain Antminer S23 Immersion (442Th) 24872% more hashrate (1.8 vs 442.0 TH/s)
- Antminer D9 46% better power draw (2,839 vs 5,304 W)
- Bitmain Antminer S23 Immersion (442Th) 99% better efficacité (1,604.0 vs 12.0 J/TH)
- Bitmain Antminer S23 Immersion (442Th) 33% better noise (75.0 vs 50.0 dB)
- Antminer D9 6% better weight (16.1 vs 17.2 kg)
- Bitmain Antminer S23 Immersion (442Th) 87% more heat output (9,687 vs 18,097 BTU/hr)
- Bitmain Antminer S23 Immersion (442Th) 22% more score de minage domestique (36.0 vs 44.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Antminer D9 | Metric | Bitmain Antminer S23 Immersion (442Th) |
|---|---|---|
| $3,000 | Upfront cost (MSRP) | $8,800 |
| -$6.75 | Daily net profit | $3.18 |
| -$5,464 | Net after 1 year | -$7,638 |
| -$7,927 | Net after 2 years | -$6,477 |
| -$10,391 | Net after 3 years | -$5,315 |
| Does not pay back at current rates (negative daily profit) | Payback period | Takes ~7.6 years to pay back at current rates |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
Bitmain Antminer S23 Immersion (442Th)$9.93/day higher profit at current rates.
Best for Home Mining
Bitmain Antminer S23 Immersion (442Th)Score: 44/100. 50 dB noise level.
Best for Efficiency
Bitmain Antminer S23 Immersion (442Th)12.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Antminer D9 or Bitmain Antminer S23 Immersion (442Th) more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Bitmain Antminer S23 Immersion (442Th) is more profitable at $3.18/day compared to $-6.75/day for the Antminer D9. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Antminer D9 vs Bitmain Antminer S23 Immersion (442Th): which runs at a lower noise level?
The Bitmain Antminer S23 Immersion (442Th) is quieter at 50 dB compared to the Antminer D9 at 75 dB. For home mining, lower noise levels make a significant difference in livability.
Which is better for home mining, the Antminer D9 or Bitmain Antminer S23 Immersion (442Th)?
The Bitmain Antminer S23 Immersion (442Th) scores 44/100 on our Home Mining Score (vs 36/100 for the Antminer D9). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
What is the efficiency difference between Antminer D9 and Bitmain Antminer S23 Immersion (442Th)?
The Antminer D9 runs at 1,604.0 J/TH while the Bitmain Antminer S23 Immersion (442Th) runs at 12.0 J/TH — a difference of 1,592.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 99% better efficacité (1,604.0 vs 12.0 J/TH).