Innosilicon A10 Pro ETH (500Mh) vs Innosilicon T2 Terminator
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 Pro ETH (500Mh) | Specification | Innosilicon T2 Terminator |
|---|---|---|
| 500.0 MH/s | Hashrate | 17.2 TH/s |
| 960 W | Power Consumption | 1,570 W |
| 1,920,000.0 J/TH | Efficiency | 91.3 J/TH |
| — | Noise Level | — |
| 8,100.0 kg | Weight | 7,500.0 kg |
| 3,276 BTU/hr | BTU Output | 5,357 BTU/hr |
| 31/100 | Home Mining Score | 28/100 |
| — | Release Year | — |
| EtHash | Algorithm | SHA-256 |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 Pro ETH (500Mh)
Innosilicon T2 Terminator
Based on BTC price of $79,061 and current network difficulty as of May 15, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Innosilicon T2 Terminator edges it: 3 of 5 factors go its way (efficiency, hashrate, price-performance). Its biggest concrete edge: 3439900% more hashrate (0.0 vs 17.2 TH/s). The Innosilicon A10 Pro ETH (500Mh) claws back ground on power consumption and home mining score. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
Stripped to the numbers, this is how far apart the Innosilicon A10 Pro ETH (500Mh) and Innosilicon T2 Terminator sit on each measurable spec:
- Innosilicon T2 Terminator 3439900% more hashrate (0.0 vs 17.2 TH/s)
- Innosilicon A10 Pro ETH (500Mh) 39% better power draw (960 vs 1,570 W)
- Innosilicon T2 Terminator 100% better efficiency (1,920,000.0 vs 91.3 J/TH)
- Innosilicon T2 Terminator 7% better weight (8,100 vs 7,500 kg)
- Innosilicon T2 Terminator 64% more heat output (3,276 vs 5,357 BTU/hr)
- Innosilicon A10 Pro ETH (500Mh) 11% more home mining score (31.0 vs 28.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A10 Pro ETH (500Mh) | Metric | Innosilicon T2 Terminator |
|---|---|---|
| $469 | Upfront cost (MSRP) | $850 |
| -$2.30 | Daily net profit | -$3.14 |
| -$1,310 | Net after 1 year | -$1,997 |
| -$2,151 | Net after 2 years | -$3,144 |
| -$2,992 | Net after 3 years | -$4,291 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A10 Pro ETH (500Mh)Score: 31/100. 0 dB noise level.
Best for Efficiency
Innosilicon T2 Terminator91.3 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Innosilicon A10 Pro ETH (500Mh) or Innosilicon T2 Terminator more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro ETH (500Mh) is more profitable at $-2.30/day compared to $-3.14/day for the Innosilicon T2 Terminator. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Innosilicon A10 Pro ETH (500Mh) or Innosilicon T2 Terminator?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Innosilicon A10 Pro ETH (500Mh) vs Innosilicon T2 Terminator: which fits a residential setup better?
The Innosilicon A10 Pro ETH (500Mh) scores 31/100 on our Home Mining Score (vs 28/100 for the Innosilicon T2 Terminator). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Innosilicon A10 Pro ETH (500Mh) vs Innosilicon T2 Terminator: how much does the efficiency gap matter?
The Innosilicon A10 Pro ETH (500Mh) runs at 1,920,000.0 J/TH while the Innosilicon T2 Terminator runs at 91.3 J/TH — a difference of 1,919,908.7 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficiency (1,920,000.0 vs 91.3 J/TH).
Compare Innosilicon A10 Pro ETH (500Mh) with...
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A11 Pro
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A4+ LTCMaster