Innosilicon A10 Pro ETH (500Mh)

Hashrate 500.0 MH/s Power 960 W Efficiency 1,920,000.0 J/TH

Innosilicon T2 Turbo 25T

Hashrate 25.0 TH/s Power 2,050 W Efficiency 82.0 J/TH

Innosilicon A10 Pro ETH (500Mh) vs Innosilicon T2 Turbo 25T

Side-by-side specs, profitability, and home mining comparison.

Specifications Comparison

Innosilicon A10 Pro ETH (500Mh)	Specification	Innosilicon T2 Turbo 25T
500.0 MH/s	Hashrate	25.0 TH/s
960 W	Power Consumption	2,050 W
1,920,000.0 J/TH	Efficiency	82.0 J/TH
—	Noise Level	—
8,100.0 kg	Weight	9,000.0 kg
3,276 BTU/hr	BTU Output	6,995 BTU/hr
31/100	Home Mining Score	26/100
—	Release Year	—
EtHash	Algorithm	SHA-256
Innosilicon	Manufacturer	Innosilicon

Profitability Comparison

Electricity Rate:

$/kWh

Innosilicon A10 Pro ETH (500Mh)

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$2.30

Daily Profit -$2.30

Monthly -$69.12

Yearly -$840.95

Innosilicon T2 Turbo 25T

Daily Revenue 0.00001150 BTC $0.91

Daily Electricity -$4.92

Daily Profit -$4.01

Monthly -$120.30

Yearly -$1,463.70

Based on BTC price of $79,088 and current network difficulty as of May 15, 2026. Actual results vary.

Verdict

Run the numbers across every spec and the Innosilicon T2 Turbo 25T edges it: 2 of 4 factors go its way (efficiency, hashrate). Its biggest concrete edge: 4999900% more hashrate (0.0 vs 25.0 TH/s). The Innosilicon A10 Pro ETH (500Mh) holds the edge in power consumption and home mining score. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.

Winner: Innosilicon T2 Turbo 25T — wins on 2 of 4 factors

Spec Deltas

The Innosilicon A10 Pro ETH (500Mh) and Innosilicon T2 Turbo 25T diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":

Innosilicon T2 Turbo 25T 4999900% more hashrate (0.0 vs 25.0 TH/s)
Innosilicon A10 Pro ETH (500Mh) 53% better power draw (960 vs 2,050 W)
Innosilicon T2 Turbo 25T 100% better efficiency (1,920,000.0 vs 82.0 J/TH)
Innosilicon A10 Pro ETH (500Mh) 10% better weight (8,100 vs 9,000 kg)
Innosilicon T2 Turbo 25T 114% more heat output (3,276 vs 6,995 BTU/hr)
Innosilicon A10 Pro ETH (500Mh) 19% more home mining score (31.0 vs 26.0)

Cost & ROI Over Time

A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.

Innosilicon A10 Pro ETH (500Mh)	Metric	Innosilicon T2 Turbo 25T
$469	Upfront cost (MSRP)	—
-$2.30	Daily net profit	-$4.01
-$1,310	Net after 1 year	-$1,464
-$2,151	Net after 2 years	-$2,927
-$2,992	Net after 3 years	-$4,391
Does not pay back at current rates (negative daily profit)	Payback period	—

Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.

Best For...

Best for Profitability

Tie

Both miners produce similar daily profit.

Best for Home Mining

Innosilicon A10 Pro ETH (500Mh)

Score: 31/100. 0 dB noise level.

Best for Efficiency

Innosilicon T2 Turbo 25T

82.0 J/TH — lower electricity cost per terahash.

Frequently Asked Questions

Which makes more money, the Innosilicon A10 Pro ETH (500Mh) or the Innosilicon T2 Turbo 25T?

At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro ETH (500Mh) is more profitable at $-2.30/day compared to $-4.01/day for the Innosilicon T2 Turbo 25T. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.

Which is quieter, the Innosilicon A10 Pro ETH (500Mh) or Innosilicon T2 Turbo 25T?

Both miners have similar noise levels. Check the specs table above for exact decibel readings.

For mining at home, should I pick the Innosilicon A10 Pro ETH (500Mh) or the Innosilicon T2 Turbo 25T?

The Innosilicon A10 Pro ETH (500Mh) scores 31/100 on our Home Mining Score (vs 26/100 for the Innosilicon T2 Turbo 25T). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.

What is the efficiency difference between Innosilicon A10 Pro ETH (500Mh) and Innosilicon T2 Turbo 25T?

The Innosilicon A10 Pro ETH (500Mh) runs at 1,920,000.0 J/TH while the Innosilicon T2 Turbo 25T runs at 82.0 J/TH — a difference of 1,919,918.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficiency (1,920,000.0 vs 82.0 J/TH).

Compare Innosilicon A10 Pro ETH (500Mh) with...

Compare Innosilicon T2 Turbo 25T with...

Shop Miners Browse our full catalog of ASIC miners, Bitaxe, and accessories. ASIC Repair 2,500+ miners repaired. Expert diagnostics and board-level repair. Miner Database Compare 500+ miners with live profitability data.