Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon T3+ 57T
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A11 Pro ETH (1500Mh) | Specification | Innosilicon T3+ 57T |
|---|---|---|
| 1.5 GH/s | Hashrate | 57.0 TH/s |
| 2,350 W | Power Consumption | 3,300 W |
| 1,566,666.7 J/TH | Efficiency | 57.9 J/TH |
| — | Noise Level | — |
| — | Weight | 10,380.0 kg |
| 8,018 BTU/hr | BTU Output | 11,260 BTU/hr |
| 26/100 | Home Mining Score | 22/100 |
| — | Release Year | — |
| EtHash | Algorithm | SHA-256 |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A11 Pro ETH (1500Mh)
Innosilicon T3+ 57T
Based on BTC price of $79,131 and current network difficulty as of May 15, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the Innosilicon T3+ 57T wins on 3 of 5 factors (efficiency, hashrate, price-performance). Its biggest concrete edge: 3799900% more hashrate (0.0 vs 57.0 TH/s). The Innosilicon A11 Pro ETH (1500Mh) claws back ground on power consumption and home mining score. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Here is every spec where the Innosilicon A11 Pro ETH (1500Mh) and Innosilicon T3+ 57T actually differ, with the gap quantified:
- Innosilicon T3+ 57T 3799900% more hashrate (0.0 vs 57.0 TH/s)
- Innosilicon A11 Pro ETH (1500Mh) 29% better power draw (2,350 vs 3,300 W)
- Innosilicon T3+ 57T 100% better efficiency (1,566,666.7 vs 57.9 J/TH)
- Innosilicon T3+ 57T 40% more heat output (8,018 vs 11,260 BTU/hr)
- Innosilicon A11 Pro ETH (1500Mh) 18% more home mining score (26.0 vs 22.0)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Innosilicon A11 Pro ETH (1500Mh) | Metric | Innosilicon T3+ 57T |
|---|---|---|
| $1,200 | Upfront cost (MSRP) | $550 |
| -$5.64 | Daily net profit | -$5.84 |
| -$3,259 | Net after 1 year | -$2,683 |
| -$5,317 | Net after 2 years | -$4,816 |
| -$7,376 | Net after 3 years | -$6,950 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A11 Pro ETH (1500Mh)Score: 26/100. 0 dB noise level.
Best for Efficiency
Innosilicon T3+ 57T57.9 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Innosilicon A11 Pro ETH (1500Mh) or Innosilicon T3+ 57T more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A11 Pro ETH (1500Mh) is more profitable at $-5.64/day compared to $-5.84/day for the Innosilicon T3+ 57T. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon T3+ 57T: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon T3+ 57T: which fits a residential setup better?
The Innosilicon A11 Pro ETH (1500Mh) scores 26/100 on our Home Mining Score (vs 22/100 for the Innosilicon T3+ 57T). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Innosilicon A11 Pro ETH (1500Mh) and Innosilicon T3+ 57T on J/TH?
The Innosilicon A11 Pro ETH (1500Mh) runs at 1,566,666.7 J/TH while the Innosilicon T3+ 57T runs at 57.9 J/TH — a difference of 1,566,608.8 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficiency (1,566,666.7 vs 57.9 J/TH).
Compare Innosilicon A11 Pro ETH (1500Mh) with...
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A11 Pro
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A4 Dominator
- Innosilicon A11 Pro ETH (1500Mh) vs Innosilicon A4+ LTCMaster