FluMiner T3 vs Whatsminer M50
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| FluMiner T3 | Specification | Whatsminer M50 |
|---|---|---|
| 115.0 TH/s | Hashrate | 114.0 TH/s |
| 1,700 W | Power Consumption | 3,306 W |
| 14.8 J/TH | Efficiency | 29.0 J/TH |
| 50 dB | Noise Level | 75 dB |
| 12.6 kg | Weight | 12.5 kg |
| 5,800 BTU/hr | BTU Output | 11,280 BTU/hr |
| 56/100 | Home Mining Score | 36/100 |
| — | Release Year | — |
| SHA-256 | Algorithm | SHA-256 |
| FluMiner | Manufacturer | MicroBT |
Profitability Comparison
FluMiner T3
Whatsminer M50
Based on BTC price of $77,391 and current network difficulty as of Apr 25, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the FluMiner T3 wins on 6 of 6 factors (efficiency, hashrate, power consumption, home mining score, noise level, price-performance). Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Best For...
Best for Profitability
FluMiner T3$3.89/day higher profit at current rates.
Best for Home Mining
FluMiner T3Score: 56/100. 50 dB noise level.
Best for Efficiency
FluMiner T314.8 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the FluMiner T3 or Whatsminer M50 more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the FluMiner T3 is more profitable at $0.05/day compared to $-3.84/day for the Whatsminer M50. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the FluMiner T3 or Whatsminer M50?
The FluMiner T3 is quieter at 50 dB compared to the Whatsminer M50 at 75 dB. For home mining, lower noise levels make a significant difference in livability.
Which is better for home mining, the FluMiner T3 or Whatsminer M50?
The FluMiner T3 scores 56/100 on our Home Mining Score (vs 36/100 for the Whatsminer M50). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
What is the efficiency difference between FluMiner T3 and Whatsminer M50?
The FluMiner T3 runs at 14.8 J/TH while the Whatsminer M50 runs at 29.0 J/TH — a difference of 14.2 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs.