FluMiner T3 official specifications and operating boundary
T3: manufacturer-supported performance, tolerances, physical, acoustic, network, electrical and environmental evidence.
Quick answer
The FluMiner T3 official specifications and operating boundary is a Bitcoin miner rated about 105 TH/s at roughly 1,650 W.
Full Specifications
| Model | FluMiner T3 official specifications and operating boundary |
|---|---|
| Model Number | T3 |
| Manufacturer | FluMiner |
| Algorithm | SHA-256 |
| Hashrate | 105 TH/s |
| Power Consumption | 1,650 W |
| Calculated nominal efficiency | 15.7143 J/TH |
| Noise Level | 55 dB |
| Dimensions | 140 x 300 x 450 mm |
| Weight | 13.8 kg |
FluMiner T3 official specification
- 105 TH/s ±5%
- 1650 W ±10%
- 55 dB manufacturer label under its stated ambient boundary
- 140 x 300 x 450 mm; 13.8 kg net
The manufacturer page states 15 J/TH at 25 °C, approximately 55 dB while also describing a 50–60 dB band, opposing turbine fans, 3U form, RJ45 10/100/1000 plus Wi-Fi, 220–240 V working input and 0–35 °C. Current, phase, frequency, connector, cord and protective device remain unpublished.
Firmware and current-use boundary
No exact public binary, version, checksum, controller/board matrix or rollback package was authenticated. Web/SD update capability is not a download authorization. Never cross-flash L1, L2, L3, T3 or L1 Pro.
Manufacturer coin labels are workload references, not current compatibility or profitability guarantees. MSRP, BTU, revenue, profit and home-use claims are withheld.