Skip to content

We're upgrading our operations to serve you better. Orders ship as usual from Laval, QC. Questions? Contact us

Bitcoin accepted at checkout  |  Ships from Laval, QC, Canada  |  Expert support since 2016

Bitmain Antminer L3++ (596Mh)

Bitmain Antminer L3++ (596Mh)

Hashrate 596.0 MH/s Power 1,050 W Efficiency 1,761,745.0 J/TH
VS
Elphapex DG2+

Elphapex DG2+

Hashrate 20.5 GH/s Power 3,900 W Efficiency 190,243.9 J/TH

Bitmain Antminer L3++ (596Mh) vs Elphapex DG2+

Side-by-side specs, profitability, and home mining comparison.

Specifications Comparison

Bitmain Antminer L3++ (596Mh) Specification Elphapex DG2+
596.0 MH/s Hashrate 20.5 GH/s
1,050 W Power Consumption 3,900 W
1,761,745.0 J/TH Efficiency 190,243.9 J/TH
Noise Level 75 dB
4,600.0 kg Weight 16.5 kg
3,583 BTU/hr BTU Output 13,307 BTU/hr
31/100 Home Mining Score 30/100
Release Year
Scrypt Algorithm Scrypt
Bitmain Manufacturer Elphapex

Profitability Comparison

$/kWh

Bitmain Antminer L3++ (596Mh)

Daily Revenue 0.00000000 BTC $0.00
Daily Electricity -$2.52
Daily Profit -$2.52
Monthly -$75.60
Yearly -$919.79

Elphapex DG2+

Daily Revenue 0.00000001 BTC $0.00
Daily Electricity -$9.36
Daily Profit -$9.36
Monthly -$280.78
Yearly -$3,416.13

Based on BTC price of $78,165 and current network difficulty as of May 16, 2026. Actual results vary.

Verdict

Run the numbers across every spec and the Elphapex DG2+ edges it: 4 of 6 factors go its way (efficiency, hashrate, noise level, price-performance). Its biggest concrete edge: 3340% more hashrate (0.0 vs 0.0 TH/s). The Bitmain Antminer L3++ (596Mh) claws back ground on power consumption and home mining score. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.

Winner: Elphapex DG2+ — wins on 4 of 6 factors

Spec Deltas

The Bitmain Antminer L3++ (596Mh) and Elphapex DG2+ diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":

  • Elphapex DG2+ 3340% more hashrate (0.0 vs 0.0 TH/s)
  • Bitmain Antminer L3++ (596Mh) 73% better power draw (1,050 vs 3,900 W)
  • Elphapex DG2+ 89% better efficiency (1,761,745 vs 190,244 J/TH)
  • Elphapex DG2+ 100% better weight (4,600.0 vs 16.5 kg)
  • Elphapex DG2+ 271% more heat output (3,583 vs 13,307 BTU/hr)
  • Bitmain Antminer L3++ (596Mh) 3% more home mining score (31.0 vs 30.0)

Cost & ROI Over Time

A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.

Bitmain Antminer L3++ (596Mh) Metric Elphapex DG2+
$1,190 Upfront cost (MSRP) $8,000
-$2.52 Daily net profit -$9.36
-$2,110 Net after 1 year -$11,416
-$3,030 Net after 2 years -$14,832
-$3,949 Net after 3 years -$18,248
Does not pay back at current rates (negative daily profit) Payback period Does not pay back at current rates (negative daily profit)

Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.

Best For...

Best for Profitability

Tie

Both miners produce similar daily profit.

Best for Home Mining

Bitmain Antminer L3++ (596Mh)

Score: 31/100. 0 dB noise level.

Best for Efficiency

Elphapex DG2+

190,243.9 J/TH — lower electricity cost per terahash.

Frequently Asked Questions

Bitmain Antminer L3++ (596Mh) vs Elphapex DG2+: which one earns more per day?

At the current BTC price and a $0.10/kWh electricity rate, the Bitmain Antminer L3++ (596Mh) is more profitable at $-2.52/day compared to $-9.36/day for the Elphapex DG2+. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.

Which is quieter, the Bitmain Antminer L3++ (596Mh) or Elphapex DG2+?

The Elphapex DG2+ is quieter at 75 dB compared to the Bitmain Antminer L3++ (596Mh) at 0 dB. For home mining, lower noise levels make a significant difference in livability.

Bitmain Antminer L3++ (596Mh) vs Elphapex DG2+: which fits a residential setup better?

The Bitmain Antminer L3++ (596Mh) scores 31/100 on our Home Mining Score (vs 30/100 for the Elphapex DG2+). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.

Bitmain Antminer L3++ (596Mh) vs Elphapex DG2+: how much does the efficiency gap matter?

The Bitmain Antminer L3++ (596Mh) runs at 1,761,745.0 J/TH while the Elphapex DG2+ runs at 190,243.9 J/TH — a difference of 1,571,501.1 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 89% better efficiency (1,761,745 vs 190,244 J/TH).