Elphapex DG1 Lite vs Goldshell Mini-DOGE III
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Elphapex DG1 Lite | Specification | Goldshell Mini-DOGE III |
|---|---|---|
| 11.0 GH/s | Hashrate | 800.0 MH/s |
| 3,410 W | Power Consumption | 500 W |
| 310,000.0 J/TH | Efficiency | 625,000.0 J/TH |
| 75 dB | Noise Level | 55 dB |
| 18.3 kg | Weight | 3.2 kg |
| 11,635 BTU/hr | BTU Output | 1,706 BTU/hr |
| 36/100 | Home Mining Score | 62/100 |
| — | Release Year | — |
| Scrypt | Algorithm | Scrypt |
| Elphapex | Manufacturer | Goldshell |
Profitability Comparison
Elphapex DG1 Lite
Goldshell Mini-DOGE III
Based on BTC price of $78,165 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the Elphapex DG1 Lite wins on 2 of 5 factors (efficiency, hashrate). Its biggest concrete edge: 1275% more hashrate (0.0 vs 0.0 TH/s). The Goldshell Mini-DOGE III claws back ground on power consumption and home mining score and noise level. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.
Spec Deltas
The Elphapex DG1 Lite and Goldshell Mini-DOGE III diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Elphapex DG1 Lite 1275% more hashrate (0.0 vs 0.0 TH/s)
- Goldshell Mini-DOGE III 85% better power draw (3,410 vs 500 W)
- Elphapex DG1 Lite 50% better efficiency (310,000 vs 625,000 J/TH)
- Goldshell Mini-DOGE III 27% better noise (75.0 vs 55.0 dB)
- Goldshell Mini-DOGE III 83% better weight (18.3 vs 3.2 kg)
- Elphapex DG1 Lite 582% more heat output (11,635 vs 1,706 BTU/hr)
- Goldshell Mini-DOGE III 72% more home mining score (36.0 vs 62.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Elphapex DG1 Lite | Metric | Goldshell Mini-DOGE III |
|---|---|---|
| — | Upfront cost (MSRP) | $499 |
| -$8.18 | Daily net profit | -$1.20 |
| -$2,987 | Net after 1 year | -$937 |
| -$5,974 | Net after 2 years | -$1,375 |
| -$8,961 | Net after 3 years | -$1,813 |
| — | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Goldshell Mini-DOGE IIIScore: 62/100. 55 dB noise level.
Best for Efficiency
Elphapex DG1 Lite310,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Elphapex DG1 Lite or the Goldshell Mini-DOGE III?
At the current BTC price and a $0.10/kWh electricity rate, the Goldshell Mini-DOGE III is more profitable at $-1.20/day compared to $-8.18/day for the Elphapex DG1 Lite. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Elphapex DG1 Lite vs Goldshell Mini-DOGE III: which runs at a lower noise level?
The Goldshell Mini-DOGE III is quieter at 55 dB compared to the Elphapex DG1 Lite at 75 dB. For home mining, lower noise levels make a significant difference in livability.
For mining at home, should I pick the Elphapex DG1 Lite or the Goldshell Mini-DOGE III?
The Goldshell Mini-DOGE III scores 62/100 on our Home Mining Score (vs 36/100 for the Elphapex DG1 Lite). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Elphapex DG1 Lite vs Goldshell Mini-DOGE III: how much does the efficiency gap matter?
The Elphapex DG1 Lite runs at 310,000.0 J/TH while the Goldshell Mini-DOGE III runs at 625,000.0 J/TH — a difference of 315,000.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 50% better efficiency (310,000 vs 625,000 J/TH).