MicroBT Whatsminer D1 vs MicroBT Whatsminer M10S
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| MicroBT Whatsminer D1 | Specification | MicroBT Whatsminer M10S |
|---|---|---|
| 48.0 TH/s | Hashrate | 55.0 TH/s |
| 2,200 W | Power Consumption | 3,500 W |
| 45.8 J/TH | Efficiency | 63.6 J/TH |
| — | Noise Level | — |
| 8,500.0 kg | Weight | 10,700.0 kg |
| 7,506 BTU/hr | BTU Output | 11,942 BTU/hr |
| 26/100 | Home Mining Score | 22/100 |
| — | Release Year | — |
| Blake256r14 | Algorithm | SHA-256 |
| MicroBT | Manufacturer | MicroBT |
Profitability Comparison
MicroBT Whatsminer D1
MicroBT Whatsminer M10S
Based on BTC price of $78,139 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the MicroBT Whatsminer D1 wins on 3 of 4 factors (efficiency, power consumption, home mining score). Its biggest concrete edge: 37% better power draw (2,200 vs 3,500 W). That said, the MicroBT Whatsminer M10S isn't beaten everywhere — it still wins hashrate. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
The MicroBT Whatsminer D1 and MicroBT Whatsminer M10S diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- MicroBT Whatsminer M10S 15% more hashrate (48.0 vs 55.0 TH/s)
- MicroBT Whatsminer D1 37% better power draw (2,200 vs 3,500 W)
- MicroBT Whatsminer D1 28% better efficiency (45.8 vs 63.6 J/TH)
- MicroBT Whatsminer D1 21% better weight (8,500 vs 10,700 kg)
- MicroBT Whatsminer M10S 59% more heat output (7,506 vs 11,942 BTU/hr)
- MicroBT Whatsminer D1 18% more home mining score (26.0 vs 22.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| MicroBT Whatsminer D1 | Metric | MicroBT Whatsminer M10S |
|---|---|---|
| — | Upfront cost (MSRP) | $3,800 |
| -$3.55 | Daily net profit | -$6.42 |
| -$1,297 | Net after 1 year | -$6,144 |
| -$2,594 | Net after 2 years | -$8,488 |
| -$3,892 | Net after 3 years | -$10,832 |
| — | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
MicroBT Whatsminer D1Score: 26/100. 0 dB noise level.
Best for Efficiency
MicroBT Whatsminer D145.8 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
MicroBT Whatsminer D1 vs MicroBT Whatsminer M10S: which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the MicroBT Whatsminer D1 is more profitable at $-3.55/day compared to $-6.42/day for the MicroBT Whatsminer M10S. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the MicroBT Whatsminer D1 or MicroBT Whatsminer M10S?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the MicroBT Whatsminer D1 or the MicroBT Whatsminer M10S?
The MicroBT Whatsminer D1 scores 26/100 on our Home Mining Score (vs 22/100 for the MicroBT Whatsminer M10S). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
MicroBT Whatsminer D1 vs MicroBT Whatsminer M10S: how much does the efficiency gap matter?
The MicroBT Whatsminer D1 runs at 45.8 J/TH while the MicroBT Whatsminer M10S runs at 63.6 J/TH — a difference of 17.8 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 28% better efficiency (45.8 vs 63.6 J/TH).