Innosilicon A10 ETHMaster (500Mh) vs Innosilicon D9 DecredMaster
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 ETHMaster (500Mh) | Specification | Innosilicon D9 DecredMaster |
|---|---|---|
| 500.0 MH/s | Hashrate | 2.4 TH/s |
| 750 W | Power Consumption | 1,000 W |
| 1,500,000.0 J/TH | Efficiency | 416.7 J/TH |
| — | Noise Level | — |
| 8,100.0 kg | Weight | 3,600.0 kg |
| 2,559 BTU/hr | BTU Output | 3,412 BTU/hr |
| 30/100 | Home Mining Score | 31/100 |
| — | Release Year | — |
| Etchash | Algorithm | Blake256r14 |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 ETHMaster (500Mh)
Innosilicon D9 DecredMaster
Based on BTC price of $78,153 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Innosilicon D9 DecredMaster edges it: 3 of 4 factors go its way (efficiency, hashrate, home mining score). The standout gap is 479900% more hashrate (0.0 vs 2.4 TH/s) in the Innosilicon D9 DecredMaster's favour. The Innosilicon A10 ETHMaster (500Mh) claws back ground on power consumption. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Stripped to the numbers, this is how far apart the Innosilicon A10 ETHMaster (500Mh) and Innosilicon D9 DecredMaster sit on each measurable spec:
- Innosilicon D9 DecredMaster 479900% more hashrate (0.0 vs 2.4 TH/s)
- Innosilicon A10 ETHMaster (500Mh) 25% better power draw (750 vs 1,000 W)
- Innosilicon D9 DecredMaster 100% better efficiency (1,500,000 vs 417 J/TH)
- Innosilicon D9 DecredMaster 56% better weight (8,100 vs 3,600 kg)
- Innosilicon D9 DecredMaster 33% more heat output (2,559 vs 3,412 BTU/hr)
- Innosilicon D9 DecredMaster 3% more home mining score (30.0 vs 31.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A10 ETHMaster (500Mh) | Metric | Innosilicon D9 DecredMaster |
|---|---|---|
| $2,150 | Upfront cost (MSRP) | — |
| -$1.80 | Daily net profit | -$2.31 |
| -$2,807 | Net after 1 year | -$844 |
| -$3,464 | Net after 2 years | -$1,689 |
| -$4,121 | Net after 3 years | -$2,533 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon D9 DecredMasterScore: 31/100. 0 dB noise level.
Best for Efficiency
Innosilicon D9 DecredMaster416.7 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Innosilicon A10 ETHMaster (500Mh) vs Innosilicon D9 DecredMaster: which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 ETHMaster (500Mh) is more profitable at $-1.80/day compared to $-2.31/day for the Innosilicon D9 DecredMaster. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Innosilicon A10 ETHMaster (500Mh) or Innosilicon D9 DecredMaster?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Innosilicon A10 ETHMaster (500Mh) or the Innosilicon D9 DecredMaster?
The Innosilicon D9 DecredMaster scores 31/100 on our Home Mining Score (vs 30/100 for the Innosilicon A10 ETHMaster (500Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Innosilicon A10 ETHMaster (500Mh) and Innosilicon D9 DecredMaster on J/TH?
The Innosilicon A10 ETHMaster (500Mh) runs at 1,500,000.0 J/TH while the Innosilicon D9 DecredMaster runs at 416.7 J/TH — a difference of 1,499,583.3 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficiency (1,500,000 vs 417 J/TH).
Compare Innosilicon A10 ETHMaster (500Mh) with...
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A11 Pro
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A4+ LTCMaster