Innosilicon A4+ LTCMaster vs Bitmain Antminer L3++ (580Mh)
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A4+ LTCMaster | Specification | Bitmain Antminer L3++ (580Mh) |
|---|---|---|
| 620.0 MH/s | Hashrate | 580.0 MH/s |
| 750 W | Power Consumption | 942 W |
| 1,209,677.4 J/TH | Efficiency | 1,624,137.9 J/TH |
| — | Noise Level | — |
| 3,830.0 kg | Weight | 4,400.0 kg |
| 2,559 BTU/hr | BTU Output | 3,214 BTU/hr |
| 30/100 | Home Mining Score | 31/100 |
| — | Release Year | — |
| Scrypt | Algorithm | Scrypt |
| Innosilicon | Manufacturer | Bitmain |
Profitability Comparison
Innosilicon A4+ LTCMaster
Bitmain Antminer L3++ (580Mh)
Based on BTC price of $78,217 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Our scoring model gives the nod to the Innosilicon A4+ LTCMaster, which leads on 2 of 4 weighted factors (efficiency, power consumption). The standout gap is 26% better efficiency (1,209,677 vs 1,624,138 J/TH) in the Innosilicon A4+ LTCMaster's favour. That said, the Bitmain Antminer L3++ (580Mh) isn't beaten everywhere — it still wins home mining score and price-performance. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.
Spec Deltas
Stripped to the numbers, this is how far apart the Innosilicon A4+ LTCMaster and Bitmain Antminer L3++ (580Mh) sit on each measurable spec:
- Innosilicon A4+ LTCMaster 7% more hashrate (0.0 vs 0.0 TH/s)
- Innosilicon A4+ LTCMaster 20% better power draw (750 vs 942 W)
- Innosilicon A4+ LTCMaster 26% better efficiency (1,209,677 vs 1,624,138 J/TH)
- Innosilicon A4+ LTCMaster 13% better weight (3,830 vs 4,400 kg)
- Bitmain Antminer L3++ (580Mh) 26% more heat output (2,559 vs 3,214 BTU/hr)
- Bitmain Antminer L3++ (580Mh) 3% more home mining score (30.0 vs 31.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A4+ LTCMaster | Metric | Bitmain Antminer L3++ (580Mh) |
|---|---|---|
| $3,500 | Upfront cost (MSRP) | $1,190 |
| -$1.80 | Daily net profit | -$2.26 |
| -$4,157 | Net after 1 year | -$2,015 |
| -$4,814 | Net after 2 years | -$2,840 |
| -$5,471 | Net after 3 years | -$3,666 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Bitmain Antminer L3++ (580Mh)Score: 31/100. 0 dB noise level.
Best for Efficiency
Innosilicon A4+ LTCMaster1,209,677.4 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Innosilicon A4+ LTCMaster vs Bitmain Antminer L3++ (580Mh): which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A4+ LTCMaster is more profitable at $-1.80/day compared to $-2.26/day for the Bitmain Antminer L3++ (580Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Innosilicon A4+ LTCMaster vs Bitmain Antminer L3++ (580Mh): which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Innosilicon A4+ LTCMaster or the Bitmain Antminer L3++ (580Mh)?
The Bitmain Antminer L3++ (580Mh) scores 31/100 on our Home Mining Score (vs 30/100 for the Innosilicon A4+ LTCMaster). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Innosilicon A4+ LTCMaster and Bitmain Antminer L3++ (580Mh) on J/TH?
The Innosilicon A4+ LTCMaster runs at 1,209,677.4 J/TH while the Bitmain Antminer L3++ (580Mh) runs at 1,624,137.9 J/TH — a difference of 414,460.5 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 26% better efficiency (1,209,677 vs 1,624,138 J/TH).
Compare Innosilicon A4+ LTCMaster with...
- Innosilicon A4+ LTCMaster vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A4+ LTCMaster vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A4+ LTCMaster vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A4+ LTCMaster vs Innosilicon A11 Pro
- Innosilicon A4+ LTCMaster vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A4+ LTCMaster vs Innosilicon A4 Dominator